Hi,
Has anybody got a full alarm list for a Mazak L32 control. i'm have trouble with the Z axis. it comes up with a 141 alarm but this is not in are manual.
Any help much appreciated.
Andy
Hi,
Has anybody got a full alarm list for a Mazak L32 control. i'm have trouble with the Z axis. it comes up with a 141 alarm but this is not in are manual.
Any help much appreciated.
Andy
141 EXCESS SIMULTANEOUS ERROR
Cause
The synchronization error between the master axis and the slave axis during synchronous control has overstepped a predetermined allowable value.
Action
Move either axis in the direction that the error decreases. Reduce the allowable value to zero (checking invalid), or increase the allowable value.