584,830 active members*
5,513 visitors online*
Register for free
Login

Thread: PD settings

Results 1 to 2 of 2
  1. #1
    Join Date
    Oct 2020
    Posts
    10

    PD settings

    I need some help yall. I have the HY Hanyang VFD and spindle. I use 120v and the rpms are manually set. Here is my PD settings.
    Attached Files Attached Files

  2. #2
    Join Date
    Jan 2005
    Posts
    15362

    Re: PD settings

    Quote Originally Posted by jpmreno View Post
    I need some help yall. I have the HY Hanyang VFD and spindle. I use 120v and the rpms are manually set. Here is my PD settings.
    You may have to do a Factory Reset if you have changed any other Parameters, as this is the only Parameters you need to get running.

    Huanyang Mactec54
    2.2Kw 110v 400Hz Water Cooled / Air Cooled

    PD000=0 ( 1 For Parameter Lock )

    PD001=0 (1 For Remote Control)

    PD002=0 ( 1 For 0-10v Terminal Control or Remote Trim Pot Control )
    ( J1 Also Needs to be set for Remote Terminal Control 1-2 jumper connection )

    PD003=400

    PD004=400

    PD005=400

    PD006=5

    PD007=20

    PD008=110 (Motor Rated Voltage )

    PD009=15

    PD010=15

    PD011=120 ( 100 Minimum Setting For Water Cooled Spindle )

    PD013= 08 is for Factory reset, Only use this to set VFD to Factory Default Settings

    PD014 Acceleration=8 ( Adjust to suit)

    PD015 Deceleration=8 (Adjust to suit)

    PD023=0 ( Forward Run Only )

    PD041=8 ( Carrier Frequency up to 10 Max for these Spindle motors)

    PD120=100 ( Stall Prevention )

    PD141=110 ( Motor Rated Voltage )

    PD142=9 ( Motor Max Amps 2.2Kw Spindle 9 amp )

    PD143=2 ( Motor Number of Poles)

    PD144=3000 (Max Motor RPM) 3,000= (24,000)

    PD070=0 ( This may need to be set to 1 if Control Voltage is 0-5v )

    PD072=400

    PD073=120 ( 100 Minimum Setting Water Cooled Spindles )

    PD174=11 ( To Be Set to the VFD Drives Max Rated Output Amps )
    Mactec54

Similar Threads

  1. Replies: 6
    Last Post: 04-18-2021, 01:00 AM
  2. cv settings
    By electric2u in forum Machines running Mach Software
    Replies: 0
    Last Post: 01-27-2011, 03:19 AM
  3. help with settings
    By asdasd in forum ArtCam Pro
    Replies: 2
    Last Post: 07-06-2010, 05:27 AM
  4. Mach3 CV settings vs. G-100 Plugin CV settings
    By Bfarn in forum Machines running Mach Software
    Replies: 7
    Last Post: 12-17-2008, 05:45 PM
  5. Settings
    By piedpipertraps in forum DynaTorch
    Replies: 7
    Last Post: 10-15-2008, 11:30 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •