Re: Help on VFD Settings Isacon Power Control Tech A2
Originally Posted by
Austa
Hi people I have an Isacon Power Control Tech A2 VFD running a 2.2kw 400hz water cooled spindle, I am thinking the VFD is a rebadged AskPower but not sure, I ran it a few times short spurts no load as I don't want to run it without the right settings.
(Australia is 220V and 50Hz)
Config parameters all start with PN, I am not having much luck finding any setup configs hoping someone can point me in the right direction seems like there is a surplus of these in Australia at the moment.
Eventually, I want to have mach3 control and have found a post on the old forum for wiring if it is an askpower but can't access the wiring diagram logon won't work :-(
Just not having much luck.
Hopefully i have placed this in the right place.
Found with google Search > https://cdn.hackaday.io/files/255641...0UserGuide.pdf
Most of those drives are pretty much the same. You might find more info on here with a Search for setup for spindles. Mactec54 is an expert on VFDs.
Retired Master Electrician, HVAC/R Commercial. FLA Saturn 2 4x4 CNC Router Mach4 Kimber 1911 45ACP