509,813 active members
3,728 visitors online
Register for free
Login
IndustryArena Forum > OpenSource CNC Design Center > Open Source Controller Boards > Open source low cost servomotor controller
Page 1 of 12 12311
Results 1 to 12 of 141
  1. #1
    Registered
    Join Date
    May 2016
    Posts
    41

    Open source low cost servomotor controller

    Hey guys,
    I would just like to announce my project, called Odrive. It is an open source high performance brushless servomotor controller, meant to be used with cheap hobby motors. It has 2 axes per board, and allows chaining multiple boards for more axes.
    Let me know if you are interested in development, or want to get your hands on some early hardware.
    Cheers!

  2. #2
    Registered
    Join Date
    Jul 2012
    Posts
    106

    Re: Open source low cost servomotor controller

    Now posted design, no posted software, no real description of features and functionality, kinda hard to have interest in a project with no content.

  3. #3
    Registered
    Join Date
    May 2016
    Posts
    41

    Re: Open source low cost servomotor controller

    Quote Originally Posted by websrvr View Post
    Now posted design, no posted software, no real description of features and functionality, kinda hard to have interest in a project with no content.
    Sorry if it was confusing, the details of the project is in the link attached to the word Odrive in the original post. I can give the link explicitly here:
    https://hackaday.io/project/11583-od...-motor-control
    Cheers.

  4. #4
    Registered
    Join Date
    Jul 2012
    Posts
    106

    Re: Open source low cost servomotor controller

    Are you the creator of this work?

    Since the project is being developed elsewhere, why is it being cross-posted here?

  5. #5
    Registered
    Join Date
    May 2016
    Posts
    41

    Re: Open source low cost servomotor controller

    Quote Originally Posted by websrvr View Post
    Are you the creator of this work?

    Since the project is being developed elsewhere, why is it being cross-posted here?
    Yeah I am. I thought it would be interesting to reach out to this community too. Especially since I see the type of machines that will benefit the most are heavy machines that need high precision.
    I was hoping to engage in a fruitful discussion on this forum about the project.

    Cheers!

  6. #6
    Registered
    Join Date
    Jul 2012
    Posts
    106

    Re: Open source low cost servomotor controller

    I'm curious to know how you came into the 150A or 75A current specification since all the PCB software I have access too tells me 30A on 4oz stopped copper is the best you can hope for.

  7. #7
    Registered
    Join Date
    May 2016
    Posts
    41

    Re: Open source low cost servomotor controller

    Quote Originally Posted by websrvr View Post
    I'm curious to know how you came into the 150A or 75A current specification since all the PCB software I have access too tells me 30A on 4oz stopped copper is the best you can hope for.
    Well, first of all this is peak current, it will for sure not cope with 150A continuous current. Also, I think I can get a fair bit of extra heat dissipation through the heatsink on the mosfets, and down the phase wires. In the end, only testing will show what the capabilities truly are. If it turns out that it is too weak for a number of CNC applications, then it should be fairly easy to increase current capability by just increasing the size of the board and mosfets.

  8. #8
    Registered
    Join Date
    May 2005
    Posts
    1397

    Re: Open source low cost servomotor controller

    As I understand it, v3 doesn't exist yet? Are the design files available for v2?
    James hosts the single best wiki page about steppers for CNC hobbyists on the net:
    http://www.piclist.com/techref/io/steppers.htm Disagree? Tell him what's missing! ,o)

  9. #9
    Registered
    Join Date
    May 2016
    Posts
    41

    Re: Open source low cost servomotor controller

    Quote Originally Posted by James Newton View Post
    As I understand it, v3 doesn't exist yet? Are the design files available for v2?
    I have a v3 on my desk atm, see attached picture. I am currently doing some basic tests to make sure that the hardware design is functional. When I have ascertained that that is the case, I will help people get their hands on some v3 boards.

    Nevertheless, all the design files are available here:

    • v3 Firmware is here
    • v3 Board design is here
    • v2 Firmware is here
    • v2 FPGA logic is here
    • v2 Board design is here


    Cheers!

  10. #10
    Registered
    Join Date
    Jul 2014
    Posts
    51

    Re: Open source low cost servomotor controller

    The motors you show are open to chips getting in. Have you built a covering for them and do they not overheat with a cover.

  11. #11
    Gold Member
    Join Date
    Feb 2007
    Posts
    4556

    Re: Open source low cost servomotor controller

    Macdowswe,

    Very nice, clean looking board.

    Please keep us in the loop, there are many interested users here.

    Welcome to the Zone,

    Jeff...
    Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish.

  12. #12
    Registered
    Join Date
    May 2016
    Posts
    41

    Re: Open source low cost servomotor controller

    Quote Originally Posted by hoecken View Post
    The motors you show are open to chips getting in. Have you built a covering for them and do they not overheat with a cover.
    Yeah they are open. I was thinking of making a shroud that houses a motor/encoder assembly, and that has an air inlet with an intake filter, and a fan for forced air cooling. This can probably increase the performance at low speeds fairly significantly since the motors own air cooling doesn't work unless they are spinning at high speed.

Page 1 of 12 12311

Similar Threads

  1. Replies: 30
    Last Post: 08-24-2015, 10:03 AM
  2. Smoothie CNC controller, Open Source.
    By Rolf_K in forum General Laser Engraving / Cutting Machine Discussion
    Replies: 6
    Last Post: 01-15-2015, 07:41 PM
  3. CNC Controller with Arduino - open source
    By Christian Knüll in forum Open Source Controller Boards
    Replies: 16
    Last Post: 12-22-2012, 10:46 AM
  4. Open Source CNC Controller Specification
    By gregmary in forum DIY CNC Router Table Machines
    Replies: 28
    Last Post: 12-05-2005, 04:58 AM
  5. BEST Open source Controller ?
    By Seventeen in forum Open Source Controller Boards
    Replies: 12
    Last Post: 09-22-2005, 12:27 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •