584,841 active members*
4,484 visitors online*
Register for free
Login
Page 1 of 4 123
Results 1 to 20 of 73
  1. #1
    Join Date
    Jun 2006
    Posts
    10

    Tria 7500 for Morbidelli Author 503

    Need urgent help for a Tria 7500 controller. Back-up batteri is gone dead, so the controller lost all data. Need help for the procedure to reinstall data. Got disk whith all data on (original) but need help step for step.(flame2)

  2. #2
    Join Date
    Feb 2006
    Posts
    14
    I have the steps and the disk.. of the Tria-7500
    but my Machine it's an Author 504K

    And I don't know... if they are compatible......

  3. #3
    Join Date
    Jun 2006
    Posts
    10

    Morbidelli A 503 STC

    Thank`s for the reaktion. It is working on a 503 STC, and we are now running again. The codes to be set is diffrent on the 2 maschines. For a Author 503 STC is it 1194121 space 1195457. I hope it can be usefull for others.
    Stoned.

  4. #4
    Join Date
    Dec 2008
    Posts
    3

    Morbidelli 504k

    I have a morbidelli 504k and I need PLC and wakeup code . Thanks

  5. #5
    Join Date
    Jun 2006
    Posts
    10
    Hey Ronnieworks.
    I have got both code and procedure to load plc files agin. If i get your mail address i will send it to you as attached word file. You probartly forgooten to renew the back up battery, i tried it myself.
    Best regards: Stoned

  6. #6
    Join Date
    Dec 2008
    Posts
    3

    Morbidelli 504k

    Quote Originally Posted by stoned View Post
    Hey Ronnieworks.
    I have got both code and procedure to load plc files agin. If i get your mail address i will send it to you as attached word file. You probartly forgooten to renew the back up battery, i tried it myself.
    Best regards: Stoned
    [email protected] Thanks

  7. #7
    Join Date
    Dec 2008
    Posts
    3
    Is your 504k with a twin pack and tool drawer if so could I get the plc and parametors and wake up code.

  8. #8
    Join Date
    Apr 2009
    Posts
    3

    Morbidelli 503

    Have codes and reload procedure for Author 504 and Author 503. email me at [email protected]

  9. #9
    Join Date
    Apr 2009
    Posts
    3
    NEED HELP with sizing on Morbidelli Author 503. Keep getting error 547 (Magazine Draw Back) when the machine DOES NOT have a tool magazine. [email protected]

  10. #10
    Join Date
    Oct 2009
    Posts
    1

    morbidelli author 504

    bonjour

    j'ai ma disquette parametre "HS" et doit les recharger sur la machine
    est ce que quelqu'un a ces parametres.
    merci

  11. #11
    Join Date
    Aug 2010
    Posts
    0
    Need urgent help for a Tria 7500 controller. Back-up batteri is gone dead, so the controller lost all data. Need help for the procedure to reinstall data. Got disk whith all data on (original) but need help step for step.

  12. #12
    Join Date
    Feb 2012
    Posts
    0

    Need Help! Tria 7500 Author 503 morbedelli with automatic tool exchange

    Need Help! Tria 7500 Author 503 morbedelli with automatic tool exchange:Can not find the proper start up discs ours seem to not be working ... contacted scm in the states with no luck tried calling UK with no reply yet. Can anyone help ? Thank you !!

  13. #13
    Join Date
    Jun 2011
    Posts
    0

    Morbidelli Author 503 (1995)

    Hi all.
    Is there anyone who can tell me if you can use G code X Y Z generatet from PC then transfered to the CNC by floppy disk?

    example would be nice

    I ask because right now we program directly on the CNC point to point and we use autocad to get the point to points and then punch them in manualy and some of the programs are very very long so it would be good to have a program where you can import the autocad drawing and generate the X Y Z and just copy it to a floppy disk and load it as a SUB program.
    Any ideas is helpful guys.

    Best regards
    Flemming

  14. #14
    Join Date
    Feb 2006
    Posts
    14
    I do not understand your question, you mean to create a file and then copy it to CNC?

    Usually uses CAD/CAM Sofware.

    but for TRIA controls, you need a system that converts
    ASCII to PGM

    Some CAD/CAM Software to Programing TRIA 7xxx Controls are:

    ASPAN
    XILOG PLUS
    ALPHACAM

    I hope this information is helpful...

  15. #15
    Join Date
    Oct 2012
    Posts
    0
    Plz help me i have morbi 504 and i need help for load plc ste by step email [email protected]

  16. #16
    Join Date
    Feb 2006
    Posts
    14
    I sent to you the Steps to load PLC data in AUTHO504

    By Email..

  17. #17
    Join Date
    Jul 2013
    Posts
    0
    Hola Baldo.
    Soy de Madrid (España), ¿Me podrías enviar por E-mail los pasos para cargar el programa de PLC en
    el AUTHOR 504. Muchas gracias. [email protected]

  18. #18
    Join Date
    Aug 2013
    Posts
    1
    Hi. Somebody have the user´s guide for program morbidelli 503, the list of g-codes available and I need access to the list of corrector x and y. thanks

    Julio

  19. #19
    Join Date
    Feb 2006
    Posts
    14
    XILOG PLUS software is special for TRIA controls
    and has a programming guide, G00, G01, G02 etc.

  20. #20
    Join Date
    Aug 2013
    Posts
    1
    I have a morbidelli author 504. Replaced the battery and could not get it started again. Keep getting message that the plc is blocked. Can someone please help me or post me some instructions on how to get it going again.
    Thanks

Page 1 of 4 123

Similar Threads

  1. morbidelli 504 tria 7500
    By rprman1 in forum Commercial CNC Wood Routers
    Replies: 25
    Last Post: 08-09-2023, 07:03 AM
  2. Tria 7500
    By num1040 in forum CNC Machining Centers
    Replies: 2
    Last Post: 11-30-2019, 03:12 PM
  3. Morbidelli Author 503 (1995) Tria 7500
    By num1040 in forum CNC Machining Centers
    Replies: 2
    Last Post: 03-05-2014, 03:42 PM
  4. TRIA 7500 software missing
    By pablogvivo in forum Controller & Computer Solutions
    Replies: 0
    Last Post: 01-07-2014, 09:45 AM
  5. 'Errore Generico' Morbidelli tria 7500
    By fmorandini in forum Maintenance DIY Discussion
    Replies: 0
    Last Post: 11-03-2013, 06:48 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •