Re: FIXED
hello, you should know the "sequences list" for a tool change procedure, from the manual i suppose / dealer ?
after, you should figure it out at what sequence number your cnc stopped, and go forward / backward from it
procedure for going forward / back is described by mr Blink i will compress all that infos :
parameters
... machine parameters
... mc sys parameters : input 1 ( active )
... mc sys parameters no 2 : atc sequence number : input * ( *= desired sequence from "sequences list" )
manual
... 1 step advance
so :
... find that tool change sequences list; if there is no way to find it, than maybe there is somebody with a same machine as yours, and so, upload a photo with your current changing status, and maybe there is a chance to have a reply about relative sequence number that you might need
... continue from a random sequence, as mr Blink said
... input = set + string + write / enter
i think you can acces the parameters for your machine, or am i wrong ? if so, it should be easy ... kindly !
Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg