584,837 active members*
5,525 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > SIEMENS Sinumerik CNC controls > SIEMENS -> GENERAL > How to force input and output signal of Siemens Sinumerik CNC controls
Results 1 to 5 of 5
  1. #1
    Join Date
    May 2017
    Posts
    6

    How to force input and output signal of Siemens Sinumerik CNC controls

    Any one can tell me how to force input and output signal of Siemens Sinumerik CNC controls ?

    I can go to the NC/PLC Screen to type and watch any input and output signal. But to force ( change ) the value of the input and output, It need the access level. It need password.

    Please help if you know the default password for any type of CNC with Sinumerick control.

  2. #2
    Join Date
    Feb 2020
    Posts
    2
    Sunrise) is tha password of tha siemens controller. this password give manufacture you try it

  3. #3
    Join Date
    May 2017
    Posts
    6

    Re: How to force input and output signal of Siemens Sinumerik CNC controls

    Quote Originally Posted by 2759482 View Post
    Sunrise) is tha password of tha siemens controller. this password give manufacture you try it
    Thank you my friend. I can access to change value of input and output. But nothing happen. Do you know what steps I have to do to make sure when I change value of output, It will be working. For example I force output value to the valve to turn on.

  4. #4
    Join Date
    Jan 2014
    Posts
    106
    Quote Originally Posted by honghaivib View Post
    Thank you my friend. I can access to change value of input and output. But nothing happen. Do you know what steps I have to do to make sure when I change value of output, It will be working. For example I force output value to the valve to turn on.
    Try to force an output that is not written/used in the logic already, see if that works

  5. #5
    Join Date
    May 2017
    Posts
    6

    Re: How to force input and output signal of Siemens Sinumerik CNC controls

    Quote Originally Posted by bill4807 View Post
    Try to force an output that is not written/used in the logic already, see if that works
    hello bill4807. Can you tell me how can I know which output not written or used in logic? I would like to know how to check Ladder logic sequence in HMI.

    Thanks

Similar Threads

  1. Mastercam X, force 4 decimal place output
    By critz in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 5
    Last Post: 07-28-2020, 06:41 PM
  2. Siemens Sinumerik CNC controls
    By gbowne1 in forum SIEMENS -> GENERAL
    Replies: 6
    Last Post: 06-25-2010, 09:33 AM
  3. 1.6V-3.0V random signal voltage parallel signal from output – Any advice?
    By cjchands in forum Mach Software (ArtSoft software)
    Replies: 0
    Last Post: 11-12-2009, 11:36 AM
  4. PMC force signal
    By yepingapple in forum Fanuc
    Replies: 3
    Last Post: 10-21-2009, 06:50 AM
  5. Input/output signal on 0M-C
    By padobranac in forum Fanuc
    Replies: 3
    Last Post: 10-28-2008, 03:49 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •