584,808 active members*
5,102 visitors online*
Register for free
Login
Results 1 to 13 of 13
  1. #1
    Join Date
    Dec 2007
    Posts
    37

    Miyano BNC34 Parameters

    I am looking for a set of parameters for a Miyano BNC34 with a 10TE control.
    can anyone send me copy, a list or a download file?

    We have a lathe that list the parametetrs, and now won`t single point a thread.


    I do not know if this was the cause of the problem.
    When we thread at a low RPM, the machine will follow the thread. Once we get to a higher RPM, after cutting 2-3 threads, it will seem to skip, and double cut the thread. We tried swapping the 2 servo drive boards with no change. We went out and replaced the spindle encoder, and that did not fix anything. That was an expensive swap. All that is left is the main board, and a possible parameter that we missed.

    It's hard to get help from Miyano on this, and we are still chasing it.
    Anyone out there have ideas?
    Or if you have mid 1980 BNC34 and the parameters printed out, I would appreciate a copy so we can compare what we have to what you have.

  2. #2
    Join Date
    Dec 2004
    Posts
    167
    Have you called Miyano in chicago, they can send you the parameter list from your serial number. We have 4 Miyanos(3 BND34S's & 1 JNC 45) here and Ive needed prams before and just called and asked for em.....they didn't charge me

    I think Derick, is the name of the guy your'll talk to.....630-766-4141 just ask for service..


    Matt

  3. #3
    Join Date
    Dec 2007
    Posts
    37
    Quote Originally Posted by TR MFG View Post
    Have you called Miyano in chicago, they can send you the parameter list from your serial number. We have 4 Miyanos(3 BND34S's & 1 JNC 45) here and Ive needed prams before and just called and asked for em.....they didn't charge me

    I think Derick, is the name of the guy your'll talk to.....630-766-4141 just ask for service..


    Matt
    I called the phone number and talked to Derrick. He said they only have itne paramets for machines 2000 and newer.

    I need to find someone with a machine like mine.

  4. #4
    Join Date
    Oct 2012
    Posts
    0
    Hi Mark18969, did you finally find the parameters, I am in the sae problem my Miyano just lost parameters last friday, unfortunatly we had no back up, can you give an advise where to get them?

  5. #5
    Join Date
    Dec 2007
    Posts
    3

    MIYANO BNC 34T Programming parameters

    Dear Sir,

    We shall be highly obliged to you, if you please arrange to get emailed programming parameters of MIYANO BNC 34T as we lost the same. Our -mail id is [email protected]

    REGARDS
    PUNEET GUPTA

    Quote Originally Posted by Mark18969 View Post
    I called the phone number and talked to Derrick. He said they only have itne paramets for machines 2000 and newer.

    I need to find someone with a machine like mine.

  6. #6
    Join Date
    Jan 2013
    Posts
    0
    let me know if you still need the parameters. we have 3 bnc 34t's with fanuc ot controls

  7. #7
    Join Date
    Feb 2013
    Posts
    4
    Dear Sir,

    I have lost parameter of lathe machine Myano 34S due to Batery broken, can you send me parameter of them. my email [email protected]

    thank in advance.
    Tu

  8. #8
    Join Date
    Dec 2010
    Posts
    2

    Re: Miyano BNC34 Parameters

    Please let me know if you can offer the parameters for this machine.
    I have a friend that I am trying to help out.
    They have a BNC-34 with the Fanuc 3T control.
    I got it back up to a basic start screen, and now it is getting alarm 11 and 21 -
    I don;t have any values in the N0034 and N0035 - The data sheets I have are hand written with "17a2"
    the original numbers are 896 - but are scratched out.

    If you can offer any help it would be great.

  9. #9
    Join Date
    Jun 2006
    Posts
    9

    Re: Miyano BNC34 Parameters

    Quote Originally Posted by futheyr View Post
    let me know if you still need the parameters. we have 3 bnc 34t's with fanuc ot controls
    Dear friend

    I have lost parameter of lathe machine Myano BNC 34S
    Can you send me parameter , if you have.
    email : [email protected]

    Thanks

  10. #10
    Dear Sir, I trust you are well. I recently import Miyano BND34S2 with C axis and sub-spindle Fanuc OT from UK. There is no Macro programs in the machine and no manual received with the machine. Can you please help me in this regard? I need to have machine M code list plus Macro programs for C axis and live tools. Thanks in advance. Stay blessed.

  11. #11
    Join Date
    Aug 2019
    Posts
    1
    Dear friend
    I would like to NC parameter and PC parameter for
    Miyano BNC-34C with Fanuc 0T-A
    Master PCB model is A16B-1010-0210

    thanks.

    [email protected]

  12. #12
    Join Date
    Nov 2011
    Posts
    17

    Re: Miyano BNC34 Parameters

    Sir,
    Pls mail me the BNC 34 T parameters to [email protected].
    My mcn is dead .
    pls help

  13. #13
    Join Date
    Mar 2009
    Posts
    12

    Re: Miyano BNC34 Parameters

    Dear Sir
    I hope you can help us with a copy of Parameter and Diagnostic of Miyano BNC-34T with Fanuc OT control and B Axis, 2 turrets.
    my email is [email protected]
    Thanks in advance

    Diego C

Similar Threads

  1. Lost parameters on Miyano bnc-34t
    By franek in forum Machinery Manuals / Brochures
    Replies: 5
    Last Post: 07-20-2022, 01:05 AM
  2. Miyano JNC-35 Lathe Parameters
    By MildBill in forum Uncategorised MetalWorking Machines
    Replies: 2
    Last Post: 11-05-2020, 01:54 AM
  3. Miyano MSV-21 Parameters
    By billay in forum Uncategorised MetalWorking Machines
    Replies: 0
    Last Post: 07-06-2011, 06:50 PM
  4. miyano bnc34 lathe
    By cordeirot in forum Okuma
    Replies: 1
    Last Post: 02-01-2010, 10:51 PM
  5. NEEDING PARAMETERS MIYANO TSV-21
    By offroadxx in forum DNC Problems and Solutions
    Replies: 3
    Last Post: 04-12-2008, 03:17 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •