I'm going to build a Joe's CNC and wanted to see if I could read a little more first. I'm a 60 year old, disabled guy and thought I could learn a little more.
Thanks for everyone's help.
David
I'm going to build a Joe's CNC and wanted to see if I could read a little more first. I'm a 60 year old, disabled guy and thought I could learn a little more.
Thanks for everyone's help.
David
There's just this one.
https://www.cnczone.com/forums/joes-cnc-model-2006-a/
Most Joe's builders in the last 10 years use his private forum.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
THANKS. I have purchased the plans and joined his forum. I just hoped to learn a little more from more experienced people.
I recognize your nickname here and want to thank you personally for helping me in the past. I ended up buy what I thought was going to be my "last machine first" a Chinese (ACCTEK 6012) which I am using to this day. No problems! Just "getting off the ground" was difficult, but thanks to good people like it turned out to be not so hard.
Thanks again!