584,802 active members*
4,983 visitors online*
Register for free
Login
Results 1 to 13 of 13
  1. #1
    Join Date
    Oct 2012
    Posts
    24

    Unhappy Mazak 6200Y 26 illegal parameter

    hi good day

    we have a machine here a Mazak 6200Y/mazatrol 640T.. it loads a UI but there a asterisk display after that the alarm appears and maybe someone has an idea this kind of alarm "26 illegal parameter". im planning to reset servo/spindle parameter but we didnt know how to do it..we just only want to try maybe could
    work on that way.. thanks

  2. #2
    Join Date
    Oct 2003
    Posts
    321

    Re: Mazak 6200Y 26 illegal parameter

    Quote Originally Posted by leiryll View Post
    hi good day

    we have a machine here a Mazak 6200Y/mazatrol 640T.. it loads a UI but there a asterisk display after that the alarm appears and maybe someone has an idea this kind of alarm "26 illegal parameter". im planning to reset servo/spindle parameter but we didnt know how to do it..we just only want to try maybe could
    work on that way.. thanks
    Hi,

    can you give some pictures of the monitor, may be also alarm history.

    best regards
    mazak-user

  3. #3
    Join Date
    Oct 2012
    Posts
    24

    Re: Mazak 6200Y 26 illegal parameter

    im sorry idont have screenshots.. but have these...

    Description Type

    26 illegal parameter servo/spindle
    17 2 port memory parity MCP
    351 spindle contactor fault machine
    381 COND. Missing(Set up SW) machine
    121 overtravel NC
    491 maint. check warning operate

    well.. i changed the battery already from NC panel which is already dead.. the next thing is to load parameter of a machine that i dont know yet.. and we have a diskette and memory card that we also found from back portion of a NC/MCP panel.

  4. #4
    Join Date
    Oct 2003
    Posts
    321

    Re: Mazak 6200Y 26 illegal parameter

    Quote Originally Posted by leiryll View Post
    im sorry idont have screenshots.. but have these...

    Description Type

    26 illegal parameter servo/spindle
    17 2 port memory parity MCP
    351 spindle contactor fault machine
    381 COND. Missing(Set up SW) machine
    121 overtravel NC
    491 maint. check warning operate

    well.. i changed the battery already from NC panel which is already dead.. the next thing is to load parameter of a machine that i dont know yet.. and we have a diskette and memory card that we also found from back portion of a NC/MCP panel.
    Hi,

    what type of control you have?
    T-Plus or Fusion 640TM

    best regards
    mazak user

  5. #5
    Join Date
    Oct 2012
    Posts
    24

    Re: Mazak 6200Y 26 illegal parameter

    Quote Originally Posted by mazak-user View Post
    Hi,

    what type of control you have?
    T-Plus or Fusion 640TM

    best regards
    mazak user


    fusion 640T..

  6. #6
    Join Date
    Oct 2003
    Posts
    321

    Re: Mazak 6200Y 26 illegal parameter

    Hi,
    If you switch on the main breaker, and then push the on button on the control, start on windows or not?

  7. #7
    Join Date
    Oct 2012
    Posts
    24

    Re: Mazak 6200Y 26 illegal parameter

    Quote Originally Posted by mazak-user View Post
    Hi,
    If you switch on the main breaker, and then push the on button on the control, start on windows or not?

    yes it is.. the Windows OS load and its UI..and you cant shutdown by pressing a button.. just machine main breaker.. and the problem is, there's an error appear on screen. the spindle and servo module has its on flickering error too but i figure out that the modules has no concern on it. because i saw some garbage text and number displayed on MCP,it display some are asterisk.. some what i thought maybe the machine NC parameter been corrupt... so i planned to overwrite the parameter and reboot again..

  8. #8
    Join Date
    Oct 2003
    Posts
    321

    Re: Mazak 6200Y 26 illegal parameter

    Hi,
    give me your mailadress.

  9. #9
    Join Date
    Oct 2012
    Posts
    24

    Re: Mazak 6200Y 26 illegal parameter

    Quote Originally Posted by mazak-user View Post
    Hi,
    give me your mailadress.
    [email protected]

  10. #10
    Join Date
    Oct 2012
    Posts
    24

    Re: Mazak 6200Y 26 illegal parameter

    thanks for the guide it helps me alot

  11. #11
    Join Date
    Oct 2003
    Posts
    321
    Quote Originally Posted by leiryll View Post
    thanks for the guide it helps me alot
    Its Ok.
    Best regards
    Mazak-user

  12. #12
    Join Date
    Mar 2013
    Posts
    3

    Re: Mazak 6200Y 26 illegal parameter

    Is some body still there
    Now I have the same problem in my Mazak 620 T Plus control
    26 illegal parameter servo/spindle

    Any idea how fix it?

    Thanks a lot

  13. #13
    Join Date
    Jan 2023
    Posts
    1

    Re: Mazak 6200Y 26 illegal parameter

    Quote Originally Posted by torresr View Post
    Is some body still there
    Now I have the same problem in my Mazak 620 T Plus control
    26 illegal parameter servo/spindle

    Any idea how fix it?

    Thanks a lot
    I'm now in the same boat. I have this error on my 1998 QT250HP Fusion 640T. Is this a reload the backed up parameters type of thing or is it something different? Any help would be greatly appreciated. Thanks in advance!
    Error reads as follows
    26 ILLEGAL PARAMETER( 1, 36,&0037)

Similar Threads

  1. Mazak VQC 20/40B Zero Return Parameter
    By nlh in forum Mazak, Mitsubishi, Mazatrol
    Replies: 7
    Last Post: 07-19-2017, 10:41 PM
  2. multiplex 6200y
    By programmer01 in forum Mazak, Mitsubishi, Mazatrol
    Replies: 0
    Last Post: 01-28-2013, 08:52 PM
  3. Mazak 6200Y Multiplex
    By soxfan1487 in forum Mazak, Mitsubishi, Mazatrol
    Replies: 1
    Last Post: 08-24-2012, 07:03 AM
  4. Mazak M plus parameter?
    By MrUZU1 in forum MetalWork Discussion
    Replies: 4
    Last Post: 06-09-2007, 02:50 AM
  5. Mazak OP2 parameter
    By xr135 in forum Mazak, Mitsubishi, Mazatrol
    Replies: 0
    Last Post: 05-17-2006, 08:11 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •