Originally Posted by
brittf
February 19, 2018
Joe
Did you get your problem resolved? I switched to Mach 4 about a year ago. What motion controller are you using? I'm using UC100 USB motion controller. I believe there is a spindle setup tab that needs to be configured. I had problems at first and was able to resolve them. I'm not presently at my machine but if you have not resolved this by Wednesday I can look a my settings and get back to you. I also tried the PoKeys57CNCDB25 motion controller but was never able to get it to work. I also tried the PMDX411 and was not able to get it to work either. What I don't like about the UC100 is that it does not support backlash control.
I have a 2015 Mill-Turn.
Anyway, let me know if you still need help and I'll do what I can.
Britt