585,589 active members*
2,774 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > CNC Machine Related Electronics > NVUM CNC Controller setting it up with the DQ860MA Micro stepper Driver

Thread: NVUM CNC Controller setting it up with the DQ860MA Micro stepper Driver

Results 1 to 2 of 2
  1. 12-25-2017, 01:41 PM #1
    adamfromUK
    adamfromUK is offline Banned
    Join Date
    Dec 2017
    Posts
    53

    NVUM CNC Controller setting it up with the DQ860MA Micro stepper Driver

    https://www.youtube.com/watch?v=J0zvoeLxPbA

    <a data-cke-saved-href="https://www.youtube.com/watch?v=J0zvoeLxPbA" href="https://www.youtube.com/watch?v=J0zvoeLxPbA">


    Hi dudes

    Can anyone help me?

    Trying to set up: NVUM CNC Controller setting it up with the DQ860MA Micro stepper Driver
    :rainfro:

    See what im doing wrong or better still how to test the NEMA 23???

    Please help

    thanks

    adam
    Reply With Quote Reply With Quote
  2. 08-03-2018, 06:37 PM #2
    rickjohnston
    rickjohnston is offline Junior Member
    Join Date
    Oct 2017
    Posts
    18
    You have you pulse and dir wires crossed.
    At the NVUM you have CPX (pulse) wired to green, but at the motor driver green is attached to DIR-. Switch pulse and dir at one of the ends and you should be good to go.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Help with DQ860MA Driver
    By HammerM0N in forum Arduino
    Replies: 1
    Last Post: 12-27-2017, 11:58 PM
  2. NVUM controller , the usb controler ...
    By Andreiir in forum Stepper Motors / Drives
    Replies: 2
    Last Post: 12-30-2016, 09:48 AM
  3. Information on DQ860MA analog stepper driver
    By JVWilliams in forum Stepper Motors / Drives
    Replies: 5
    Last Post: 10-26-2014, 12:43 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules