[Supo Oluwasakin]

Hi all. I bought a small 40w CO2 cooled chinese laser machine with moshidraw/ moshisoft software but I've not been able to use it. Need some help.

[Robine]

why you didn't contact the supplier?

[smartman]

Hi all. I bought a small 40w CO2 cooled chinese laser machine with moshidraw/ moshisoft software but I've not been able to use it. Need some help.

Have you followed the operation manual?
Did you install the soft correctly?
May be you can give us some detailed description of the problem, so that we might give some suggestions to you.

[limacrouter]

Hi, maybe i can give you some suggestions about chinese laser equipment. Let me know more, pls. I am peggy from limac cnc router. www.limac.cc is our website. You can contact me by [email protected],if you would like....
:rainfro:
Good day to you!

[Supo Oluwasakin]

Hi Peggy, thanks alot.
I will check your website and get back to you soon. I have been busy with a few other things.
Supo

[Supo Oluwasakin]

Smartman and Robine,
Like to say thanks also. I installed the software properly but the toolbars in the moshisoft software does not work. I had contacted the supplier but he referred me to someone else who has not been of much help. I got a mail from someone saying I should upgrade as a couple of people have complained about the same machine and software.
Supo