[YV600]

I have recently aquired a TL40 with an 11t control. There are a few issues I am trying to resolve. First is setting tool geometry in "z". The procedure I believe is to touch off a pre made fixture, type Z0 and press measure. When I do this the controls tells me data out of range. Am I missing something? The next problem is setting the parameter to enable macro b. I turn on PWE and go to adjust a 9000 parameter the machine alarms with locked parameter. Is there something else I need to do?

Thanks in Advance

[greenery_fr]

I have recently aquired a TL40 with an 11t control. There are a few issues I am trying to resolve. First is setting tool geometry in "z". The procedure I believe is to touch off a pre made fixture, type Z0 and press measure. When I do this the controls tells me data out of range. Am I missing something? The next problem is setting the parameter to enable macro b. I turn on PWE and go to adjust a 9000 parameter the machine alarms with locked parameter. Is there something else I need to do?

Thanks in Advance

http://www.cnczone.com/forums/showthread.php?t=94521