584,850 active members*
4,465 visitors online*
Register for free
Login
IndustryArena Forum > Events, Product Announcements Etc > Want To Buy...Need help! > Mode switch for Fanuc 10m on a Dahlih 1020mcv
Results 1 to 3 of 3
  1. #1
    Join Date
    Aug 2007
    Posts
    6

    Mode switch for Fanuc 10m on a Dahlih 1020mcv

    I am looking to buy a Mode switch for Fanuc 10m on a Dahlih 1020vmc I have tried the importers maxtec with out success it is a 9 position 26 pin 4 level rotary switch home,rapid ,jog ,handle ,mdi ,edit ,memory tape positions I would appreciate any contact details you may have

  2. #2
    Join Date
    Aug 2007
    Posts
    6

    mode switch

    I used and obtained the same switch from Victor machines in newyork the Vturn 26 fanuc ot 1995 machine has the exact same switch

  3. #3
    Join Date
    Dec 2003
    Posts
    24216
    Usually these switches are set up to switch a 4 bit binary pattern (4- 9 position decks), if you have problems some one that supplies Grayhill product should be able to supply.
    Al.
    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.

Similar Threads

  1. Dahlih MCV 1020 Fanuc 10m
    By burbankbrewer in forum Fanuc
    Replies: 7
    Last Post: 10-30-2017, 11:32 PM
  2. MODE SELECTOR SWITCH FOR 0i-T
    By CHANDRU in forum Fanuc
    Replies: 1
    Last Post: 10-21-2007, 04:46 PM
  3. Dahlih MCV 1020 Fanuc 10m
    By burbankbrewer in forum Community Club House
    Replies: 0
    Last Post: 11-15-2006, 05:44 PM
  4. Switch mode power supplies
    By OCNC in forum CNC Machine Related Electronics
    Replies: 1
    Last Post: 12-01-2004, 05:44 PM
  5. 320's and switch mode PSU
    By kong in forum Gecko Drives
    Replies: 7
    Last Post: 12-13-2003, 04:03 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •