Hi,
I'm wiring up a PDS Colombo RS110 3phase, 220V, 32 Amps@400Hz,10HP Spindle to a Delta VFD075B, and I'm getting an "oL" (Overload) on the display of the VFD after a few seconds, I woul'd like to know if anyone here is familiar with Delta VFD's? and what parameters do I need to set for this spindle?.
Another thing, when press the 'mode' button 4 times lead to Amperage reader, then press 'Run' button it indicates ---> A 65, does this mean that the spindle is drawing 65 amps?
PDS spinlde spec.: http://rapidshare.com/files/36352654...ombo_RS110.pdf
Delta VFD spec.: http://www.delta.com.tw/product/em/d..._manual_en.pdf

Thanks,