584,879 active members*
5,345 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > Servo Motors / Drives > Fanuc servo and spindle control with mach3
Results 1 to 3 of 3
  1. #1
    Join Date
    Feb 2009
    Posts
    17

    Question Fanuc servo and spindle control with mach3

    Hello every one,

    Is there any guy around who used fanuc servo with mach3

    I am very newer to fanuc systems. i had never used it before or converted!

    there are surplus servo drives and spindle control from scratch machine.

    the fanuc CNC control is old and i am going to replace to accept mach3's raw pulse and direction.

    for Fanuc servos and spindle system model nos. found from the cabinet


    1) A06B-6079-H203, 2.5Kw

    2) A06B-6081-h106, 9.4Kw

    3) a06b-6082-H211#512, 13.2Kw


    :cheers:

  2. #2
    Join Date
    Mar 2009
    Posts
    106
    To get full benefit of those servos I would suggest EMC2 rather than Mach as you will able to create a true closed loop system. Pico systems has reasonably priced boards that can tie everything together. http://pico-systems.com/oscrc4/catal...ex.php?cPath=4

  3. #3
    Join Date
    Feb 2009
    Posts
    17

    Question Any one help me for configuration with mach3!!!

    marzetti Thanks for your reply,


    But i am in confusion for perticular that model of drives! i tried googling but not found any satisfactory detailed info!!!

    i needed help on finding connection diagram, parameter settings, tuning etc, etc... like adapting newer servo/VFD to controller soft. like mach 3 or any other. there is no issue on reliability for mach3. i don't know about Linux CNC. but have interest to try out EMC!!!

    :Cheers:


    Any one help me for configuration with mach3!!!

    :Cheers:

Similar Threads

  1. mach3 spindle control on nm-200
    By urbanimports02 in forum Novakon
    Replies: 2
    Last Post: 01-19-2010, 04:33 PM
  2. Setting up Spindle Control in mach3
    By UKRobotics in forum Mach Mill
    Replies: 2
    Last Post: 10-18-2009, 10:34 PM
  3. Mach3 spindle control of Boxford 260 VMC
    By jwhitley in forum Benchtop Machines
    Replies: 1
    Last Post: 09-09-2008, 06:21 PM
  4. VSD-A Spindle control in MACH3?
    By mkuivamaki in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 8
    Last Post: 09-08-2008, 08:09 PM
  5. SX3 spindle speed control with Mach3
    By bbox in forum Benchtop Machines
    Replies: 47
    Last Post: 07-05-2008, 11:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •