I am looking to buy some limit switches for my machine that I am nearing completion on and I found these. I am using a G540 and the recommended power supply that is rated for 48v and 7.3a.
http://cgi.ebay.com/4-CNC-Limit-Swit...item3ca09fcd51
Specs say that they are rated for 4 amps at 125 volts AC. and 1/2 amp at 125 vdc. And that these can be connected normally closed or normally open via the three sets of screw lugs.
Results 1 to 3 of 3
-
03-19-2010, 05:01 PM #1
Junior Member
- Join Date
- Mar 2006
- Posts
- 233
will these limit switches work with my G540?
-
03-19-2010, 05:47 PM #2
Gold Member
- Join Date
- Jul 2007
- Posts
- 1602
There isn't any significant current going through a limit switch so these would be fine.
bob
-
03-19-2010, 08:06 PM #3
Registered
- Join Date
- Jul 2008
- Posts
- 267
I have similar on my data-cut and they work just great.
Reply With QuoteSimilar Threads
-
G540 and proximity switches
By Fixittt in forum Gecko DrivesReplies: 50Last Post: 06-20-2015, 01:57 AM -
Limit switches and homing switches
By AeroKam in forum Open Source CNC Machine DesignsReplies: 16Last Post: 01-05-2008, 02:56 PM -
The relationship of limit switches to home switches.
By MikeAber in forum CNC Machine Related ElectronicsReplies: 4Last Post: 11-04-2004, 08:28 PM -
Limit switches and home switches
By viktorcnc in forum CNC (Mill / Lathe) Control Software (NC)Replies: 2Last Post: 08-03-2004, 12:11 PM -
Home switches and limit switches.
By ynneb in forum CNC Machine Related ElectronicsReplies: 5Last Post: 04-08-2004, 11:32 PM
Posting Permissions
