So there we were... all excited about our new machine. We are newbies at cnc and were happy that soon we could do away with the template handheld router technic that we had been using for many years. Anyway we unpacked the machine, levelled it, cleaned it up, got power to it and all was good... now to the DSP, it powers up, shows the Excitech logo and then says goto home? if you hit 'ok' the machine goes to home and all is good. Now for the problem... if you hit the menu button on the DSP the screen is just blank. No Menu at all.


After all the reading that we have done on this forum it seems that our DSP should be ok but we need to do some sort of factory reset. We have tried the "hold down 'ok' button then plug into power. Emergency program comes up and we click on it but it doesn't do anything.. still the same problem. Anyway can someone please help a brotha out