584,849 active members*
3,940 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Syil Products > Stepper driver dip switch configuration
Results 1 to 1 of 1
  1. #1
    Join Date
    Mar 2006
    Posts
    43

    Stepper driver dip switch configuration

    I've been looking for a dip switch configuration chart to work with the pre-2010 drivers for a while. Syil Canada was able to help me out with the numbers so I thought I'd put it in a chart form on this site....

    S1 is for the half current setting (enable = off, disable = on)
    S2-4 are for setting of the micro-stepping

    I realized that the formatting of what I posted was terrible, so I cleaned it up and put the info into an excel file.
    Attached Files Attached Files

Similar Threads

  1. Configuration to match yaskawa driver and cnc
    By hoyospetrola in forum Servo Motors / Drives
    Replies: 4
    Last Post: 12-08-2008, 05:21 PM
  2. Stepper Driver, Controller, Breakout board, Home switch, ?????
    By perolalars in forum CNC Machine Related Electronics
    Replies: 4
    Last Post: 10-28-2007, 03:35 PM
  3. Dip Switch configuration
    By carlo_hoayek in forum Automation Technology Products
    Replies: 2
    Last Post: 10-26-2007, 08:27 AM
  4. R7D-AP02H Servo driver CN1 and CN2 pin configuration?
    By Thinh VN in forum Servo Motors / Drives
    Replies: 4
    Last Post: 08-01-2007, 02:11 AM
  5. STEPPER DRIVER FAQ {Stepper/driver amp per phase match.
    By huios in forum Stepper Motors / Drives
    Replies: 0
    Last Post: 08-27-2006, 02:43 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •