i have a machining center with control Fanuc 0imc and manual guide i as an option.
is it possible to use tool path simulation to see animated tool path drawing ??
if yes ... kindly tell me how to do that step by step.
thank you all
i have a machining center with control Fanuc 0imc and manual guide i as an option.
is it possible to use tool path simulation to see animated tool path drawing ??
if yes ... kindly tell me how to do that step by step.
thank you all
any help ???
Hello, sorry i sent the answer to this to your inbox.
The Fanuc Support Center Team
www.fanuc-support.com
Also see this.
http://cnczone.com/forums/showthread.php?t=79138
The Fanuc Support Center Team
www.fanuc-support.com
Dear all,
after putting D after tool change, the solid simulation appeared.
the problem now is : simulation is working ok but when the machine not running, i need to make simulation appear while my the NC program running (during machining).
so what do you think.
do you mean that solid simulation is not working during machining ?