Originally Posted by
gwarble
i have two identical hardinge/bridgeport vmc xp3 1000 's, and i'm unable to override or disable (or find any relevant info) on custom g-code macros...
i'm pretty sure these are manual guide i g-codes, the symptom i'm seeing is that redefining a custom g-code of a number between 100 and 999 will not work... ie: defining a custom macro m-code works perfectly, the same as on my other 18i's, 0i's, 18mc, 0-mc's, 31i, etc... (using params 6050-6080, 3202, and progs o900x-o902x)
and defining a custom G88 works perfectly, but defining a custom g101 gives me a custom alarm message (ie #300x), which is the same custom alarm as running a g101 which is not defined by params 6050+...
so factory set machine, MDI a G101 and i get something like:
alarm #3009 Incorrect cutting conditions
and even if i redefine G101 custom macro, i get the same message, and the program (ie: o9011) will not be called...
something besides 6050 params is overriding all my g-codes between 100 and 999, and my only guess is that they are manual guide i g-codes... but i guess they could be MTB g-codes i guess... nothing in the books
thanks for any help
- gwarble