509,742 active members
3,661 visitors online
Register for free
Login

Thread: X4 or X5

Page 2 of 3 123
Results 13 to 24 of 29
  1. #13
    Registered
    Join Date
    Apr 2004
    Posts
    52

    Video

    I took some video this weekend of a program but I have not been able to upload it to youtube. I cannot access the youtube upload site. I'll keep trying. The file is 121meg wmv file. Any suggestions on how to get it uploaded?

    I ran a program that ran for about 2 hours cutting steel. I used a 1/4 inch carbid bit and since getting cutters here is nearly impossible I was pretty cautious. I ran 10ipm with .010 depth of cut. I was getting some lost steps on the rapids so I set the velocity back to 60 and the rapid to 100ips.

    At these settings I did not appear to loose any steps.

  2. #14
    Registered
    Join Date
    Feb 2008
    Posts
    154
    Thank you 2nsteel for the video, I hope we can see it sometimes. I heard youtube is blocked from China, may be you experience this type of problem. If you could email it to me I could post it on my youtube account, but it might be too big, I dont know. I don't know of any other way, even though I am sure there is.
    I'll send you a personal message with my address in case you want to try.
    Christian

  3. #15
    Registered
    Join Date
    Feb 2008
    Posts
    154
    And Syil seems to post on this website: http://u.youku.com
    Some sort of Chinese youtube knock off.
    C.

  4. #16
    Registered
    Join Date
    Apr 2004
    Posts
    52
    I have seen that site. Unfortunatley I don't read Chinese. I thought I would try google video but they are no longer allowing uploads to their site. I will look into picasa. Open to other suggestions.

  5. #17
    Registered
    Join Date
    Feb 2008
    Posts
    154
    I know, if you don't speak chinese this website is pretty much useless to post. Picassa will probably work. This might work, but I never used it (Fill free to try with my address):

    http://www.transferbigfiles.com/

  6. #18
    Registered
    Join Date
    Apr 2006
    Posts
    838
    we have much video,but can not login for youtube....
    we close for this site similar like google.cn
    Direction,Commitment,Follow through

  7. #19
    Registered
    Join Date
    Feb 2008
    Posts
    154
    2ndsteel was kind enough to send me a video of his X5. He also let me post it on youtube. You can search for concombrefrais, this is my login name on youtube too.

  8. #20
    Registered
    Join Date
    Feb 2008
    Posts
    154
    Here is the direct link to the video:
    [nomedia="http://www.youtube.com/watch?v=czaQV15fgvY"]YouTube- Syil X5 cnc mill[/nomedia]

  9. #21
    Registered
    Join Date
    Jun 2007
    Posts
    394
    What control unit are you using which is at the side of the enclosure.

  10. #22
    Registered
    Join Date
    Apr 2004
    Posts
    52
    If you are asking about the unit on the right side of the enclosure it is a digital scale display. I have purchased and installed a 3 axis electronic scale system. This is mostly to check for lost movements or inaccurate travels.

    If you are asking about the big box on the left below the enclosure it is the X5 electrical panel that comes installed on the back of the mill. I wanted to be able to move the mill close to a wall and so I moved this panel to the side and installed it on the base.

  11. #23
    Registered
    Join Date
    Jun 2007
    Posts
    394
    Thanks for the video link. I have chosen the X5 however I am considering the X7 but I could get 2 X5's for the price of the X7.

    I am living in Ireland and manufacture scale models so I use 4 benchtop machines.

    www.cdmodelz.com

    I believe this will be the first Syil machine in Ireland.

    I am hoping to order it in July/August. I want to wait for the ATC to be available. Does anyone know when it will be available and if it will be mounted to the table or a carousel type?

  12. #24
    Registered
    Join Date
    Apr 2006
    Posts
    838
    Quote Originally Posted by fidia View Post
    Thanks for the video link. I have chosen the X5 however I am considering the X7 but I could get 2 X5's for the price of the X7.

    I am living in Ireland and manufacture scale models so I use 4 benchtop machines.

    www.cdmodelz.com

    I believe this will be the first Syil machine in Ireland.

    I am hoping to order it in July/August. I want to wait for the ATC to be available. Does anyone know when it will be available and if it will be mounted to the table or a carousel type?
    the x7 ATC we will release within a month.
    and you can take with me or Mr hugh to import this machine.
    thank you.
    Direction,Commitment,Follow through

Page 2 of 3 123

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •