584,860 active members*
5,187 visitors online*
Register for free
Login
Results 1 to 8 of 8
  1. #1
    Join Date
    Apr 2010
    Posts
    0

    G65... unknown G code?

    Hi all, I'm new to the zone. I have a problem with a Niigata HN63C with a Fanuc 15-M control, it wont accept a G65, or any variable programming. Does anyone know what parameter it might be to enable macro programming? Thanks!

  2. #2
    Join Date
    Feb 2006
    Posts
    992
    "unknown G-code" alarm? if that's the case, you out of luck even turn parameter on 'cause u dont have macro option.
    The best way to learn is trial error.

  3. #3
    Join Date
    Apr 2010
    Posts
    0
    Thanks. Cheers!

  4. #4
    Join Date
    Jun 2008
    Posts
    1511
    You more then likely don't have macroB on your control but as a test program #1=5 in MDI mode. If you get an alarm then you don't have macroB. Let me know.

    Stevo

  5. #5
    Join Date
    Apr 2010
    Posts
    0
    Hey thanks, no it doesnt work, it says invalid break point of words. when ever i try to use any "IF" or "GOTO" words, it seperatets them into single letters. It's messed up, I have never ran a mill that didnt work with G65.

  6. #6
    Join Date
    Jun 2008
    Posts
    1511
    PM me your 9100 parameters and I will take a look at them. They should go from 9100 to about 9160 or so.

    Stevo

  7. #7
    Join Date
    Dec 2003
    Posts
    24216
    Do you have a print out or hard copy of your 9000 parameters you can email?
    Al.
    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.

  8. #8
    Join Date
    Apr 2010
    Posts
    0
    Yes I have a copy of the machine parameters, and can email as well.

Similar Threads

  1. UNKNOWN FAULT CODE
    By CNC_BOB in forum OKK
    Replies: 8
    Last Post: 11-18-2022, 07:57 PM
  2. Unknown controller
    By bjtoo in forum PIC Programing / Design
    Replies: 0
    Last Post: 03-23-2010, 06:42 AM
  3. Unknown g code G23 error?
    By keaton64 in forum Mach Plasma / Laser
    Replies: 3
    Last Post: 09-22-2009, 03:33 AM
  4. Unknown steppers
    By wolfdagon in forum Stepper Motors / Drives
    Replies: 0
    Last Post: 03-12-2007, 01:52 AM
  5. Unknown Fanuc PSM
    By ulihuber in forum Fanuc
    Replies: 2
    Last Post: 08-11-2006, 01:13 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •