Hello,
I need help with a new-onset error on my OKK with Fanuc OM and PMC, 30x changer. For several days, the automatic tool change is no longer- the arm of swings, the pneumatic switch is safe but in the pneumatic valve for the booster is not steered on. After about 5 seconds then comes the error 2110th But when I press the button for manual tool clamping, the manual change is fine, the Pneumatic Valve and the Booster works fine.? Where can I look for da best, I have checked all the connections already are tight.
Greetings from germany,
Thomas