Piece #1: Carriage off my gantry that needs the Z axis bolted to. Pictures 2-10 show the carriage. The piece is cast aluminum and is all one piece.
Picture number 7, clearly shows the face that the new actuator must bolt to. Picture number 6, displays dimensions of overall unit. (it may be hard to fit in a mill, since its large, and a weird shape)
Picture number 1 shows the gantry, the carriage goes underneath the gantry exposing only the face that the Z axis will bolt to.
Piece #2: 8" K2 z axis actuator.
Picture 11 and 12 show the new actuator (my z axis).
Picture 13 shows all the information that is required to machine the carriage so i can bolt the new Z axis on.
The Z axis is arriving sometime around the 10th, then i will have more pictures on exactly how i want them to go together. Just center the new axis on the plate. I will have to see if i want both bottom edges flush or if any offset will have to occur. I will for sure take pictures of them double sided taped together just to so everyone can get the picture on how it goes together properly.
I will not be sending the new K2 Z axis in the mail. If you are local i can drop it off to you, but you shouldn't need it with the full drawings supplied to you. I will be bolting the unit together myself.
If you have any questions please feel free to ask me.
Thank you!! =)