Hi All

I have just bought an old Feeler FV-600 Milling machine from 1998.

I´m little in doubt about how much memory there is installed in the machine.
In the upper left corner of the memory card A16B-2201-0101 there are 4 pcs. NEC D43256BGU-85LL small packages and in the middle sit 4 pcs. D43256BCZ-70LL larger packages.

My Parameter 901 is set at 01000100 = 80 Meter
Is it possible that I can change to 01000001 = 320 Meter


Attachment 445474