hi, could anybody help with information on pulling dimensions from a 3d model.
we need to produce stage drawings.
we are using edgecam part modeler.
any information or links to info would be much appriciated.
hi, could anybody help with information on pulling dimensions from a 3d model.
we need to produce stage drawings.
we are using edgecam part modeler.
any information or links to info would be much appriciated.
Open PartModeler - goto Help toolbar and go into tutorials.
Bottom tutorial is 'drafting and detailing a solid model'.
Easy peasy.
thank you v.much,
we are new users to edgecam and have only recieved some pretty basic training. thanks again.
use geometry from edges botton... select the geo you want to dim..or select the whole model..then dimension the 2d geo you need (assuming you are dimensioning on the current cpl)
DONT MIND MY SPELLING ... IM JUST A MASHINIST