New project to make a Mill Riser Block out of a piece of hydraulic cylinder 406 O.D. 340 I.D and 216mm long. It was bandsawn from a barrel 3.7m long that weighed 1300kg. This piece alone is around 75kg. A Mill riser block fits on top of the column and raises the turret 200mm to allow more clearance between the spindle and the table for larger jobs like boring a small engine or drilling with a long drill bit or tapping with a tapping head or working over a large rotary table or vise.
They can be purchased for a Bridgeport secondhand for a reasonable price but the King Rich is a bit larger and very expensive. Access to a piece of stock like this made the project viable to build one..