Does anybody have this software? I know these drives are a little older but I need a copy of it.
Thanks, Charles
Does anybody have this software? I know these drives are a little older but I need a copy of it.
Thanks, Charles
Well, thankfully after contacting Sanyo Denki, they provided me with the software!
I've had a couple people ask for this software, so I've decided to attach it here.
Charles
Hi Charles,
I have the Ver1.24E + serial cable but cannot get any communication with the driver. Have tried installing the SW on W7/32bit and W98SE and no go, I get 'Communicate Error' and some accessviolation when exiting program in W98 but no accessviolation in W7.
Any hints what to do to get comms working?
Cheers
Bengt
Dear Sir
I have PZ model.
this software can be used for PZ model .
thanks so much
HI
I HAVE SAME BL SUPER PZ MODEL.....HAVE YOU FIND THE SOFTWARE?
...IF PLEASE SHARE
THANKS
Merciiiii
hi charles i tried to install this software on w10 but i have a trouble trying to install it on my PC, i have a message that told me is not a version for my computer, i tried disable the smartscreen and install with compatibility of WXP SP3 but i got always the same truoble, some idea for solution this problem?
thanks.
Precisó este software
Charles, I have Sanyo Denki PV 2 drives. I made a cable and tried the PY - PC software but I get a wrong version message.
Do you know where I can get the PC - to - PV 2 software? Best regards,
Don in PA
mehhaba sanyo denkki pc kablo bağlantı şemasını vere bilirmisiniz
Hello,
Has anyone been able to setup one of these PY2 amps?
I'm having problems with JOG mode. Amps have no alarms, I can get to the point that GUI for motor direction are displayed but the motor doesn't turn. Any ideas what i'm doing wrong.
I have the Ver1.24E + serial cable but cannot get any communication with the driver. 'Communicate Error'
Do you have someone else's version of Windows 95?
Attachment 350222