584,802 active members*
4,949 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > Servo Motors / Drives > Sanyo PY0/PY2 Tuning Software
Page 3 of 3 123
Results 41 to 49 of 49
  1. #41
    Join Date
    Sep 2010
    Posts
    26

    Re: Sanyo PY0/PY2 Tuning Software

    Does anyone have a serial cable PIN diagram?
    Thank

  2. #42
    Join Date
    Jul 2020
    Posts
    2

    Re: Sanyo PY0/PY2 Tuning Software

    You can find the software manual here, and on page 41 is the cable PIN diagram: https://manualzz.com/doc/26762500/us...---sanyo-denki
    Attached Thumbnails Attached Thumbnails OP pinout.jpg  

  3. #43
    Join Date
    Sep 2010
    Posts
    26

    Re: Sanyo PY0/PY2 Tuning Software

    Quote Originally Posted by luisvidigal View Post
    You can find the software manual here, and on page 41 is the cable PIN diagram: https://manualzz.com/doc/26762500/us...---sanyo-denki
    Thank you.
    Maybe you have a diagram of encoder cable (PY2 - P5 motors)?

  4. #44
    Join Date
    Jul 2020
    Posts
    2

    Re: Sanyo PY0/PY2 Tuning Software

    Quote Originally Posted by darkoford View Post
    Thank you.
    Maybe you have a diagram of encoder cable (PY2 - P5 motors)?
    Not sure if this is what you need but check this out. Did you manage to connect with the driver with the software? I am still trying to connect with the driver. Spent the hole day today but no luck. I have the software installed in a virtual machine winXP 32, do you know if is possible to communicate with the driver while using the virtual machine, or I need a PC running native winXP? regards
    Attached Thumbnails Attached Thumbnails Encoder connection Diagram.jpg  

  5. #45
    Join Date
    Sep 2010
    Posts
    26

    Re: Sanyo PY0/PY2 Tuning Software

    I need the correct wire layout for encoder PY2 -> P5. so I can test the correctness because it shows me the encoder error flashing "8".
    The machine on which the equipment was used was WIN NT 2000.
    I haven't connected the amplifier to the PC yet because I don't have a connector. Maybe connect directly in the coming days.

    Btw. Unable to open file (last). If you can email [email protected] Thanks
    Attached Thumbnails Attached Thumbnails Screen Shot 07-24-20 at 04.53 PM.PNG  

  6. #46
    Join Date
    May 2022
    Posts
    1

    Re: Sanyo PY0/PY2 Tuning Software

    Quote Originally Posted by heathmanc View Post
    I've had a couple people ask for this software, so I've decided to attach it here.

    Charles
    hi charles i tried to install this software on w10 but i have a trouble trying to install it on my PC, i have a message that told me is not a version for my computer, i tried disable the smartscreen and install with compatibility of WXP SP3 but i got always the same truoble, some idea for solution this problem?

    thanks.

  7. #47

    Re: Sanyo PY0/PY2 Tuning Software

    hy sir can you send me the connection diagram of this cable or connection image
    i shall be thankful to you

  8. #48
    Join Date
    Dec 2022
    Posts
    1

    Re: Sanyo PY0/PY2 Tuning Software

    Quote Originally Posted by heathmanc View Post
    I've had a couple people ask for this software, so I've decided to attach it here.

    Charles
    I have an issue running the setup. "This app can't run on your pc"

  9. #49
    Join Date
    May 2023
    Posts
    1

    Re: Sanyo PY0/PY2 Tuning Software

    Precisó este software

Page 3 of 3 123

Similar Threads

  1. Fanuc servo tuning software.
    By GPena in forum Fanuc
    Replies: 5
    Last Post: 03-16-2019, 02:14 AM
  2. Sanyo-Denki BL Super BL827 amp, 27BA030FXT tuning
    By bevins in forum Servo Motors / Drives
    Replies: 1
    Last Post: 02-21-2014, 02:49 PM
  3. Best servo drive with tuning software for my DC servos?
    By RouteBot in forum Servo Motors / Drives
    Replies: 5
    Last Post: 09-22-2013, 09:08 PM
  4. R2010 Tuning Software
    By foxprints in forum Servo Drives
    Replies: 4
    Last Post: 01-03-2007, 03:05 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •