I have a 1994 Arrow 750 with the CT control. I'm getting a 9036 error message "Static RAM File System Corrupted Main PLC". Does anybody have any ideas on how to fix this? Any help would be appreciated.
Thanks,
Dean
218.590.3130
I have a 1994 Arrow 750 with the CT control. I'm getting a 9036 error message "Static RAM File System Corrupted Main PLC". Does anybody have any ideas on how to fix this? Any help would be appreciated.
Thanks,
Dean
218.590.3130
It could be a goofy program so purge them all. If that does not fix it you will need to reload all the software. I have had that message 2 or 3 times.
Hi
I have the same problem in the 1995 ARROW 500 which we just bought.
In addition to the error message, there is another one.
"Static RAM FIle system Corrupted COMP PLC"
9253 PLC name definition error _9.13 "09.13"
File: Main.plc
SOurce line number : 463
_9.13 "09.13"
I don't know where to find the file.
Also, it seems the memory board is missing.
I suspected the backup battery is dead too.
Is there suppose a floppy drive in the machine? WHere?
Is there a hard drive?
Thanks for help in advance.
Have you guys fix your machines yet ? I think I can help you.
I also have the same problem u.u do you know what can be done in this case??? I am desperate :violin:
I bought this machine hoping to run my machine shop, please help
Thanks
Btw, the machine is from 1994
Error9036 : Sistema de arquivos RAM estático corrompido
MAIN.PLC
Error9036 : Sistema de arquivos RAM estático corrompido
FNC.LM1
Error9245 : Número de bits do PLC fora do intervalo (!)
AndnGammaP Id B31.02 'Mudança de marcha do Terugkoppelen
Arquivo:
main.plc Número de sourceline: 1502
andnGammaP id B31.02 'Mudança de marcha Terugkoppelen
.............
Tenho o mesmo problema, alguma ideia para uma solução?