496,262 active members
6,844 visitors online
Register for free
Login
496,262 active members
Results 1 to 7 of 7
  1. #1
    Registered
    Join Date
    Dec 2008
    Posts
    6

    Arrow 750 with CT control error message 9036

    I have a 1994 Arrow 750 with the CT control. I'm getting a 9036 error message "Static RAM File System Corrupted Main PLC". Does anybody have any ideas on how to fix this? Any help would be appreciated.

    Thanks,

    Dean

    218.590.3130

  2. #2
    Registered
    Join Date
    Jan 2008
    Posts
    48
    It could be a goofy program so purge them all. If that does not fix it you will need to reload all the software. I have had that message 2 or 3 times.

  3. #3
    Registered
    Join Date
    Dec 2009
    Posts
    2
    Hi
    I have the same problem in the 1995 ARROW 500 which we just bought.

    In addition to the error message, there is another one.
    "Static RAM FIle system Corrupted COMP PLC"

    9253 PLC name definition error _9.13 "09.13"

    File: Main.plc
    SOurce line number : 463
    _9.13 "09.13"

    I don't know where to find the file.
    Also, it seems the memory board is missing.
    I suspected the backup battery is dead too.
    Is there suppose a floppy drive in the machine? WHere?
    Is there a hard drive?

    Thanks for help in advance.

  4. #4
    Registered
    Join Date
    Jul 2007
    Posts
    59
    Have you guys fix your machines yet ? I think I can help you.

  5. #5
    Junior Member
    Join Date
    Aug 2014
    Posts
    12

    Re: Arrow 750 with CT control error message 9036

    I also have the same problem u.u do you know what can be done in this case??? I am desperate :violin:

    I bought this machine hoping to run my machine shop, please help
    Thanks

  6. #6
    Junior Member
    Join Date
    Aug 2014
    Posts
    12

    Re: Arrow 750 with CT control error message 9036

    Btw, the machine is from 1994

  7. #7
    Junior Member
    Join Date
    Jan 2018
    Posts
    1
    Error9036 : Sistema de arquivos RAM estático corrompido
    MAIN.PLC

    Error9036 : Sistema de arquivos RAM estático corrompido
    FNC.LM1


    Error9245 : Número de bits do PLC fora do intervalo (!)
    AndnGammaP Id B31.02 'Mudança de marcha do Terugkoppelen


    Arquivo:
    main.plc Número de sourceline: 1502
    andnGammaP id B31.02 'Mudança de marcha Terugkoppelen

    .............
    Tenho o mesmo problema, alguma ideia para uma solução?

Similar Threads

  1. Cincinnati Arrow error 9036 HELP!
    By cncwork in forum Cincinnati CNC
    Replies: 15
    Last Post: 12-24-2018, 08:05 AM
  2. Replies: 0
    Last Post: 11-25-2013, 02:13 PM
  3. DX-32 Control, Error Message, No Clue!
    By minton in forum General CNC (Mill / Lathe) Control Software (NC)
    Replies: 2
    Last Post: 07-30-2011, 04:34 AM
  4. GE control error message
    By Good_GuyMN in forum Machine Problems, Solutions , Wireless DNC, serial port
    Replies: 0
    Last Post: 02-14-2009, 08:22 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •