hi everyone
anyone in need of post processors for all types of MACHINES 3 4 5 AXIS AND MULTI TASKS...
I develop post processors for nxcam without links only
a post processor tested and approved quality over 100%
only machines multi tasks can be links..but milling only one post..
interest and if so contact me via email or skype
[email protected]
skype: andrenxcam7
Results 1 to 1 of 1
-
05-31-2010, 05:25 PM #1
Registered
- Join Date
- May 2010
- Posts
- 0
DEVELOPMENT POST PROCESSORS 3 4 5 AXIS AND MULTI TASKS
ANDRÉ LUIS DO NASCIMENTO
SPECIALIST CAM APPLICATIONS MULTI AXIS / IS&V (NX)
Reply With QuoteSimilar Threads
-
post processor development
By doug6949 in forum FeatureCAM CAD/CAMReplies: 9Last Post: 10-10-2020, 11:39 PM -
My two 4 axis Haas post processors (VF2)
By DiegoM in forum EdgeCamReplies: 7Last Post: 04-07-2009, 05:13 AM -
Performing tasks during X-axis-movement
By tottish in forum LinuxCNC (formerly EMC2)Replies: 20Last Post: 03-18-2009, 03:49 PM -
Compare Catia and MCX2 for multi axis lathe/4 axis mill
By bob1112 in forum Uncategorised CAM DiscussionReplies: 0Last Post: 10-11-2008, 01:15 AM
Posting Permissions
