584,805 active members*
5,350 visitors online*
Register for free
Login
IndustryArena Forum > WoodWorking Machines > CNC Machining Centers > Masterwood 323 '94 post processor
Results 1 to 17 of 17
  1. #1
    Join Date
    Sep 2007
    Posts
    3

    Masterwood 323 '94 post processor

    I have a Masterwood 323 from '94, control CN6, FORA 6.23 . I write a postprocessor for this machine ( VCarve ), but is incomplet.I have not any kind of documentation for the machine. Does have anybody a operating manual for Masterwood 323 or another with CN6 (CN10) control ? Or for another Masterwood from 1992 - 1998 ?Best Regards, Walter

  2. #2
    Join Date
    Dec 2008
    Posts
    7

    Programming manual

    Hello
    I have manual for Masterwood 323 from '94, control CN6.
    If you still need the manual, here is it.

    http://rapidshare.com/files/44513041...n_LB000040.zip

    http://rapidshare.com/files/44513028...ramming_UK.zip

  3. #3
    Join Date
    Sep 2007
    Posts
    3

    Thank you !

    I have pay 50euro for the complete documentation for Masterwood 323. Now , the machine working fine. I make postprocessors for this machine for VCarvePro.Thank you for your amability !May we change some files with gcode !
    Best Regards,
    Walter Chele

  4. #4
    Join Date
    Dec 2008
    Posts
    7

    Masterwood 323

    Sorry for not see your first post before, you be save 50 euro.
    I write post processor for Artcam and must test the files.
    How you input G code files into machine and run it.
    If you can describe to me I would be grateful.

    Thanks in advance
    Romeo

  5. #5
    Join Date
    Dec 2010
    Posts
    0
    Walter , I have tried many people as to get a post processor for my machine.
    I have the same machine as you have.
    can you please help me
    regards
    francois

  6. #6
    Join Date
    Dec 2008
    Posts
    7

    Masterwood

    Hello francois

    Maybe I can help you. For which CAM software you need post procesor?

  7. #7
    Join Date
    Dec 2010
    Posts
    0
    hi there
    I would appreciate any help i can get
    i have spoken to various people and i am still to buy cad cam software but i am not willing to buy software unless i am certain that it will work with my machine.
    some guys even came to my factory to look at the machine and code and they promised me that they will get it working before they charge me , after 3 or 4 visits i have not seen them again.
    so now i am still sitting with nothing
    i had my head in the machine again and it is actually a Masterwood Project 323 '93 model cn6 controller

    again i would appreciate any help i can get.
    francois
    [email protected]

    Thanx

  8. #8
    Join Date
    Dec 2008
    Posts
    7

    Masterwood 323 with CN 6 control

    Hi

    I work in factory which produces wood doors. I am programmer for all cnc machines in factory.
    We have also Masterwood 323 with CN 6 control. It is old machine but very accurate.
    I programming machine manual with G-code. Recently I write post processor for Artcam but after generating
    G-code is necessary to little alter the code. For this machine is complicated to get clean code.
    For now I have not tray with other CAM software. It's complicated to tell you
    which CAM is good for you. Tell me for which CAM software you are interest.
    Maybe I can help you more or even write post processor for that CAM.

    Greetings
    Romeo

  9. #9
    Join Date
    Dec 2010
    Posts
    0
    iwas looking at artcam and also vectric aspire but if you can help me with a post for artcam then i will probably go that route

  10. #10
    Join Date
    Dec 2010
    Posts
    0
    where do you get spares for the machine?
    thanks for the help

  11. #11
    Join Date
    Dec 2010
    Posts
    0
    can you mail me a copy of the post processor please.
    also i am looking for the manual and wiring diagrams for this machine.
    where can one find that ?
    [email protected]
    or [email protected]

  12. #12
    Join Date
    Dec 2008
    Posts
    7
    I send you post processor.

  13. #13
    Join Date
    Dec 2008
    Posts
    7
    Little update. If you not wont to mirror drawings in artcam you can do it on machine. Simple add G52 in the first line of g-code. This mirror work on machine.

  14. #14
    Join Date
    Dec 2008
    Posts
    7
    On weekend I have try to rewrite post processor and succeed. From this post you get a clean code. Origin(zero) are in up left corner yust how is on the machine.

    Enjoy, Romeo
    Attached Files Attached Files

  15. #15
    Join Date
    Aug 2013
    Posts
    0
    Hello,

    I need a manual voor a masterwood project 309 with cn 6 control.

    Can send anyone me the manuals you have?

    If anyone have an total update of the software, I like to try that to.

    [email protected]

    Thanks!

  16. #16

    Re: Masterwood 323 '94 post processor

    Anyone in 2021 that can help with some manuals regarding the 323?

  17. #17
    Join Date
    May 2022
    Posts
    2

    Re: Masterwood 323 '94 post processor

    Hello, is there a machine master wood project 250 ??

    - - - Updated - - -

    Quote Originally Posted by jura2020 View Post
    On weekend I have try to rewrite post processor and succeed. From this post you get a clean code. Origin(zero) are in up left corner yust how is on the machine.

    Enjoy, Romeo
    Hello, is there a machine master wood project 250 ??

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •