I need to conrol my machine outside of the GUI by using external CYCLE start and FEED hold buttons.
Thanks, Jerry
I need to conrol my machine outside of the GUI by using external CYCLE start and FEED hold buttons.
Thanks, Jerry
look here:
HALUI for cycle stop/start
http://www.linuxcnc.org/docs/2.4/htm...i.html#r1_2_15
HAL for feedoverride:
http://www.linuxcnc.org/docs/2.4/htm...2hal.html#r1_1
Thanks Chester88, I'll take a look at those links.
Jerry