I got my hands on an older, but functional O-scope and I'm going to try to tune my G320's. The scope obviously doesn't have the ability to record the trace. Will I be able to see the oscillations? That's probably a dumb question... Has anyone else tuned the drive with a non-recording o-scope?
I'm guessing that I'm going to use the mach3 function that just bounces the servo back and forth at a given interval.
I welcome all input.
Results 1 to 2 of 2
-
06-11-2010, 02:31 PM #1
Registered
- Join Date
- May 2008
- Posts
- 152
Tuning with and old-school O-Scope
-
04-19-2014, 07:48 AM #2
Registered
- Join Date
- Mar 2014
- Posts
- 15
Re: Tuning with and old-school O-Scope
You'll need s dual channel scope so that you can trigger at the right moment. Voltage should be 2v and time should be 1ms.
Reply With QuoteSimilar Threads
-
Servo tuning without an O-scope
By southernexplore in forum Gecko DrivesReplies: 4Last Post: 02-01-2017, 01:15 PM -
G320 motor tuning issue with Fluke 124 scope
By turbotoys in forum Gecko DrivesReplies: 1Last Post: 12-16-2013, 11:54 PM -
How to buy a used o-Scope?
By vacpress in forum CNC Machine Related ElectronicsReplies: 4Last Post: 03-08-2007, 02:35 AM -
G 320 tuning w/scope
By Cruiser in forum Gecko DrivesReplies: 12Last Post: 09-08-2006, 04:18 AM -
Tuning Servos with out an O-scope?
By Bird_E in forum Gecko DrivesReplies: 2Last Post: 02-23-2005, 07:16 PM
Posting Permissions
