I purchased a used cam tech router (spacemaker) has enroute installed. The machine did not come with any manuals or product information. Does anyone have a manual or information in PDF?
I purchased a used cam tech router (spacemaker) has enroute installed. The machine did not come with any manuals or product information. Does anyone have a manual or information in PDF?
Hello
I am new with Enroute. I would like to create output file as G-Code. What driver I have to select ? Can any one help me please.
Thanks.
VS Hester,
Although Cam Tech calls their software something else, they nearly all ran Wincnc.
The driver that you want is the cncctrl09 or Wincnc04. Neither one are part of the EnRoute package. I'm including cncctrl09. The post processor belongs to Microsystems World CNC. MicroSystems World CNC - PC Based CNC Controller - WinCNC CNC Software - CNC Controller Software - WinCNC - CNC Motion Control - "Home". If you have problems installing it, I think they can help you, but they will probably charge you a small fee. They really know their stuff. Of course they should, they wrote the post.
muqtadir,
It all depends on what type of machine you are using. If your controller is Wincnc, you can use this post also. If it is something else, you'll need a different one.
Hope this helps,
Butterknife.