584,829 active members*
4,842 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Fanuc 11m parameter write protect
Results 1 to 3 of 3
  1. #1
    Join Date
    Apr 2009
    Posts
    11

    Fanuc 11m parameter write protect

    I have been searching on here on how to unlock the 8000 parameter so that I can change other parameters. One other note, the edit mode does not work either. The write protect switch is enabled, and I check the connections to it. I can background edit, but not in regular edit mode. I just got the machine a couple of weeks ago. I looked and found a switch on the main board, but that did not work. Thanks for the ideas,

    Brian

  2. #2
    Join Date
    Jun 2006
    Posts
    7
    Hi,

    Press EMERGENCY STOP button. Press "SETTINGS" softkey twice to get "SETTING(SETTING)" screen.
    Type in "8000" then press "INP-NO".
    Parameter number 8000 should appear on the screen.
    Type "10000001" and press "INPUT". Alarm " SW000 PARAMETER ENABLE SWITCH ON " will appear.

  3. #3
    Join Date
    Apr 2009
    Posts
    11
    That worked, I got the parameters changed and that fixed the other problem. Thanks a lot.

Similar Threads

  1. Replies: 8
    Last Post: 04-30-2010, 11:54 AM
  2. Fanuc OT parameter(s)
    By erwin1958 in forum Daewoo/Doosan
    Replies: 5
    Last Post: 03-27-2009, 04:36 AM
  3. FANUC 15T Write Protect
    By bmlw in forum Fanuc
    Replies: 2
    Last Post: 10-11-2008, 08:47 PM
  4. Parameter write enabling on Fanuc OiT
    By hense in forum Fanuc
    Replies: 6
    Last Post: 06-02-2008, 11:26 AM
  5. L50 parameter write
    By Bluesman in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 0
    Last Post: 02-09-2006, 12:49 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •