[spankyky]

I come to buy a pc turn 120
but there is a probleme when i start for make reference with touch " AUX"
he display 'l'entreineur principal pas pret" " chuck not ready"
i think the probleme is in frequency variator, have you some idéa where the probleme come ? in variator only 2 LED is on

[cnc_swe]

First of all, set the Rotary Switch in to the left and press buttom AUX in 3-4 sek and deep thump can be heard, it is the oil pumping system. When completed. Press X one time then press Z one time. This will make zeropoint.
Turn your Rotary Switch to Aut or MIDI or JOG and so on.

Test in MIDI
G04 F0.15 S1500 M04 push Enter
G01 x40 push Enter

this don´t start any thing but press the green button one´s
The maschinery process the line one after the other.