[F.Sharifi]

Dear All
hi , i have hitachi seiki with micon 16 and Fanuc 6MB , i can run M06 machine going to find tools and just wait , without any alarms . on micon 16 there isnt any red alarm . machine has been stoped for more than 2 years , i purchased from second hand market . for sure that i have plc ladder on micon or reloaded it please just help me .

[empireweld]

Do you request a tool? Try T1 M06 ;

[cncrepairs]

Dear All
hi , i have hitachi seiki with micon 16 and Fanuc 6MB , i can run M06 machine going to find tools and just wait , without any alarms . on micon 16 there isnt any red alarm . machine has been stoped for more than 2 years , i purchased from second hand market . for sure that i have plc ladder on micon or reloaded it please just help me .

Dear sir
pl confirm wheather it is a vmc/hmc and micon 16ii or 16iii as all other function except atc are working then the plc is in healthy condition don't worry,it may have stuck up in some interlock,pl check ab table.u may contact on may mail '[email protected]