[bengt65]

hi all

I have an Okuma LU25 with OSP7000L controller.
I have changed the batterypack , but i still get the alarm. As i understand , its needed a diskette from okuma to be able to reset this alarm.

Any suggestions?

[Algirdas]

do You want us to guess, what alarm message says?

[CNCZILLA]

hi all

I have an Okuma LU25 with OSP7000L controller.
I have changed the batterypack , but i still get the alarm. As i understand , its needed a diskette from okuma to be able to reset this alarm.

Any suggestions?

You understand correctly. There is a Battery/Maintenance disc that resets the control data for the battery change. The service rep will have to do this as there is a procedure required. You will get this alarm until this is done.

[bengt65]

thank you for your reply

Im very far from the sevicerep, about 1,5 hour flight, so i wanted to do this myself.
So if i could get the diskette and the procedure, i would do this myself.
I dont think this is too difficult for experienced programmers or engineers to fix , with the right tools.

It's quite expensive to fly a service rep just to reset this battery alarm.

to the other post :

Im sorry i didnt post the exact alarm , but it's obvious the batteryalarm, and the procedure for this, on this controller.

[Algirdas]

obvious the batteryalarm
It's easy to find solution starting with accurate alarm message on Okuma Alarm and Error list or Troubleshooter.
i wanted to do this myself
I would try first bootable 3½" disk and enter maintenance or service on menu.
There is another solution also - You can try re-install OSP software. It doesn't harms, You just need to prepare backup of parameters and user files.

[racerx78]

Dose any one out there have a copy of the battery reset disc? Can you send me or better yet email a copy?