Could someone post a decent program so I can give my recently converted 7 x 10 a good try-out? I'm using Mach, and don't yet have spindle control using Mach. Just looking for a moderate length program to run the Z & X axis thru their paces.
Thanks - Bill :cheers:
UPDATE: no need..... Found a sample program in Turbo CNC's directory.
Thread: G-code sample program wanted
Results 1 to 3 of 3
-
06-21-2010, 04:24 PM #1
Registered
- Join Date
- Nov 2007
- Posts
- 616
G-code sample program wanted
-
06-22-2010, 12:06 AM #2
Member
- Join Date
- Feb 2010
- Posts
- 0
Sounds like it's almost soup!
Wen I was young, I spent most of my money on fast women, slow horses, and cheap booze. The rest of it I just wasted.
-
06-22-2010, 01:20 AM #3
Registered
- Join Date
- Nov 2007
- Posts
- 616
Oh, almost!! It's fully running now, but I'm hoping someone will come up with a program I can test out on it, until I'm capable of creating my own.
UPDATE: no need..... Found a sample program in Turbo CNC's directory.
Reply With QuoteSimilar Threads
-
Sample Nisshinbo g-code program
By ehab in forum CNC (Mill / Lathe) Control Software (NC)Replies: 3Last Post: 05-17-2017, 10:59 AM -
need sample program
By vintageracer in forum MilltronicsReplies: 3Last Post: 11-15-2008, 10:58 PM -
Need IEI-ISO sample program for Mazatrol 640 T
By turkaygeyik in forum Mazak, Mitsubishi, MazatrolReplies: 0Last Post: 05-29-2007, 03:03 PM -
Need Sample Waterjet / Plasma G Code Program
By BlueChip in forum Waterjet General TopicsReplies: 2Last Post: 01-14-2006, 03:04 AM -
I need sample G code program
By bunalmis in forum G-Code ProgramingReplies: 1Last Post: 08-24-2004, 09:50 AM
Posting Permissions
