584,866 active members*
5,291 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > HURCO > Integrator Parameter File could not be read from disk.
Results 1 to 7 of 7
  1. #1
    Join Date
    Aug 2010
    Posts
    0

    Integrator Parameter File could not be read from disk.

    When I power up my machine I can not get it to calibrate and I am geting this alarm. "Integrator Parameter File Could Not Be Read From Disk. The File Allocation Table Is Corrupt.

  2. #2
    Join Date
    Feb 2012
    Posts
    67
    Did you leave the floppy in the A: drive when booting up? I think I've seen a similar error when I've done that.

  3. #3
    Join Date
    Aug 2010
    Posts
    0
    Nope no disk left in. I can get to the main screen and move in manual. Also I can review the program. But I can't get the machine to calibrate or run a program.

  4. #4
    Join Date
    Jun 2008
    Posts
    1103
    Sounds like your Configuration has got corrupted. Do you have a backup disk?

  5. #5
    Join Date
    Aug 2010
    Posts
    0
    Yes I have a book of disk. Not sure which one to use. Or how to use it exactly.

  6. #6
    Join Date
    Jun 2008
    Posts
    1103
    If you have the control started, get a new floppy disk and make sure it's formatted.
    Put it in the machine drive and select Auxiliary followed by system configuration. Next select backup config.
    Wait until the machine has finished doing the backup. This is just so you have a copy of how the machine is now.

    Find the machine config disk in your folder.
    Put this in your drive and go through Auxiliary and system configuration but this time select restore config.
    Once it has finished loading the files, reboot the control.
    Be sure to check and reset all tools in the toolchanger map if it has one as they may not match the tool positions in the magazine.

  7. #7
    Join Date
    Aug 2009
    Posts
    1

    Re: Integrator Parameter File could not be read from disk.

    I have same issue and unfortunately without backup disk on my hand. I even got error 'The File Allocation Table Is Corrupt' when I tried to backup current config files. Is that possible to get factory config disk, any idea? Thanks a lot.

Similar Threads

  1. Read D-parameter in CNC-programme
    By Ingmar Trobäck in forum Fanuc
    Replies: 9
    Last Post: 07-26-2012, 01:18 PM
  2. Free CNC DXF file art disk download
    By custom dxf file in forum News Announcements
    Replies: 3
    Last Post: 01-25-2011, 06:07 PM
  3. can we read the current status of a parameter
    By sinha_nsit in forum Fanuc
    Replies: 12
    Last Post: 12-07-2009, 01:44 PM
  4. Halloween DXF file Art Disk download
    By custom dxf file in forum News Announcements
    Replies: 0
    Last Post: 09-09-2009, 05:07 PM
  5. File Upload from Disk
    By Big"E" in forum Haas Mills
    Replies: 27
    Last Post: 06-16-2007, 02:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •