Hey I'm a newbie on these forums and needed help in finding a post processor for Sinumerik 810D controller for Solidcam 2010. My machine is a 3 axis vertical machining centre.
Hey I'm a newbie on these forums and needed help in finding a post processor for Sinumerik 810D controller for Solidcam 2010. My machine is a 3 axis vertical machining centre.
This is NOT one my post's therefore I hold NO responsibility for it.
Sinumerik_810D_3X.zip
Cheers
D
Thanks Dan. Will try it on a simple program and check it out first.
Tried the post processor on a number of programs and it works like a charm. The only issue being that all the comments are in German. Can I change them to English somehow?
I would look at the GPP file and find all the german words, then google them to find out what they mean.
Cheers
D
I looked at the GPP file and could not find anything in there. But the MAC file has a default_lang = GERMAN. I tried changing this to english but it did not work.
Hello,
for school work I need help for finding a postprocessor for the Sinumerik 840D for controller Solidcam 2010
Machine is 3 axis vertical machining center EMCO Concept Mill 55.
Anyone out there use a Concept Mill 55 with Mastercam software? I'm looking for a copy of the post-processor files to bring one back to life.
Thanks!
This attached postprocessing Sinumerik 810D
Works like a charm, both on 810D and 840D. though, start and end of generated program should be changed, but besides that all good.
Thanks for upload!
I added a rotary 4th axis to my machine and now I need a 4th axis compatible post processor for the same machine. is there any way that I can convert the existing post processor to support the 4th axis?