584,814 active members*
5,420 visitors online*
Register for free
Login
Page 1 of 2 12
Results 1 to 20 of 34
  1. #1
    Join Date
    Jun 2010
    Posts
    0

    Mori Seiki MV-Junior parameters

    Hello,

    Urgently needed:

    CNC and PC parameters for a Mori Seiki MV-Junior with FANUC Series 10M control.

    Can anybody help with parameters??


    Kevin.

  2. #2
    Join Date
    Jun 2008
    Posts
    1511
    Have you tried calling Mori yet??

    Stevo

  3. #3
    Join Date
    Nov 2006
    Posts
    418
    Send me a PM with your e-mail address and I'll get the full listing from my machine in the AM. I'm at the house right now and don't have them at hand.

    Rgds,
    John B

  4. #4
    Join Date
    Nov 2006
    Posts
    418
    Kevin,

    Just sent the parameters through. Sitting here watching the Ghana / Uruguay World Cup game - screaming my head off!!!

    Rgds,
    John

  5. #5
    Join Date
    Sep 2008
    Posts
    67
    hi all
    any one can help me
    i need machine parametrs,pmc and special parametrs moriseiki mv junior email:[email protected],
    thunk you with best regards.

  6. #6
    Join Date
    Nov 2006
    Posts
    418
    lmostafa,

    Parameters have been sent.

    Regards,
    John B

  7. #7
    Join Date
    Jun 2012
    Posts
    0
    Hello John B
    Urgently needed:

    CNC and PC parameters for a Mori Seiki MV-Junior with FANUC Series 10M control.

    Rgds,
    pitoon

  8. #8
    Join Date
    Mar 2005
    Posts
    816
    I would like the MVJr w/10M parameters too.

  9. #9
    Join Date
    Jun 2013
    Posts
    0

    Mori Seiki MV Jr. / Fanuc 10M Parameters

    I apologize to ask, but I noticed some of you had the Mori Seiki MV Jr. / Fanuc 10M Parameters. I am in desperate need to get a machine up and running. I would be most appreciative if anyone could email them to me at [email protected]

    Thank you,

    Dave @ HECC

  10. #10
    Join Date
    Jul 2015
    Posts
    13

    Re: Mori Seiki MV Jr. / Fanuc 10M Parameters

    Quote Originally Posted by HECC View Post
    I apologize to ask, but I noticed some of you had the Mori Seiki MV Jr. / Fanuc 10M Parameters. I am in desperate need to get a machine up and running. I would be most appreciative if anyone could email them to me at [email protected]

    Thank you,

    Dave @ HECC
    Hi
    I sent the parameters to your email.
    please check and tell me in case of any problem
    Regards

  11. #11
    Join Date
    Jul 2015
    Posts
    13

    Re: Mori Seiki MV-Junior parameters

    Quote Originally Posted by hadi-nour View Post
    Hi,
    I have a Fanuc 10M Morie seiki MV Juniour Mill with 30 tools.
    unfortunately all the parameters have been deleted and I don't have a backup.
    so I would be grateful if you can send me parameters.
    also i have tried another morie seiki parameters but now I have this alarm massage on the screen
    SV027 X ILLG DGTL SERVO PARAMETRER
    SV027 Y ILLG DGTL SERVO PARAMETRER
    SV027 Z ILLG DGTL SERVO PARAMETRER

    Can you plz help me solve the problem.
    E-mail: [email protected]
    phone : +98-915-124-7083
    Best regards
    Hi all
    I have noticed that these errors refer to servo motor direction : parameter 1879 in which the X,Y,Z parameters should be 111 or -111.
    and servo motor type parameter 1874
    I have solved the problem by setting these parameters

  12. #12
    Join Date
    Sep 2008
    Posts
    67

    Re: Mori Seiki MV-Junior parameters

    hellow
    mybe youe cn has los paramerters

  13. #13

    Re: Mori Seiki MV-Junior parameters

    Quote Originally Posted by John_B View Post
    Send me a PM with your e-mail address and I'll get the full listing from my machine in the AM. I'm at the house right now and don't have them at hand.

    Rgds,
    John B
    Hello John B,
    I am in need of the Mori MV-Junior parameters as well. Can you please send a copy?
    Thanks!
    Jared

  14. #14
    Alguien que me pueda enviar por favor los parámetros morí seiki MV junior 10 m

  15. #15
    Hola yo también ocupo los parámetros para la morí seiki por favor mi correo es [email protected]

  16. #16
    Join Date
    Sep 2019
    Posts
    1

    Re: Mori Seiki MV-Junior parameters

    could someone pass me the parameters of MORISEKI JUNIOR FANUC 10M

  17. #17
    Join Date
    Jan 2021
    Posts
    2

    Re: Mori Seiki MV-Junior parameters

    I hope this forum is still active..... I have a mv junior with fanuc 10m, it zero returns fine but i get soft overtravel alarms on all axis... If anyone has them, could you please send me the parameters? I'd like to get this machine up and running again asap.

  18. #18
    Join Date
    Jan 2021
    Posts
    1

    Re: Mori Seiki MV-Junior parameters

    Pls send Mori seiki MV Jr fanuc 10m option parameters on [email protected]

  19. #19
    Join Date
    Mar 2013
    Posts
    12

    Re: Mori Seiki MV-Junior parameters

    Quote Originally Posted by Visible View Post
    Pls send Mori seiki MV Jr fanuc 10m option parameters on [email protected]
    Here!

  20. #20
    Join Date
    Jun 2018
    Posts
    3

    Re: Mori Seiki MV-Junior parameters

    Hello,

    Urgently needed:

    CNC and PC parameters for a Mori Seiki MV-Junior with FANUC Series 10M control.

    Can anybody help with parameters plz ??
    [email protected]

Page 1 of 2 12

Similar Threads

  1. Mori Seiki MV Junior
    By TCSpooner in forum Fanuc
    Replies: 9
    Last Post: 07-10-2013, 05:26 PM
  2. Mori Seiki MV Junior through 7' high opening?
    By trentbosch in forum Mori Seiki Mills
    Replies: 2
    Last Post: 09-22-2012, 07:16 PM
  3. MORI SEIKI MV JUNIOR system error 912- FANUC O-MC
    By janez9 in forum Mori Seiki Mills
    Replies: 2
    Last Post: 05-16-2011, 01:53 PM
  4. mori seiki mv junior "jog rset" error
    By Arsonist in forum Uncategorised MetalWorking Machines
    Replies: 10
    Last Post: 03-25-2010, 12:45 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •