584,805 active members*
4,854 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Sep 2006
    Posts
    69

    Servo Tuning HELP!!

    Hello all,

    I have a 3 axis VMC with Vickers acromatic A2100 control. Just recently the X axis has started making a high pitched resonance noise while moving, this continues for a short time even when the axis is stationary. I assume the servo drive needs tuning(siemens simodrive). Can anyone help me with this? I would like to connect my laptop to the drive and run an Autotune but am unsure how to do this and what software to use.

    Any help would be much appreciated

    Thankyou

  2. #2
    Join Date
    Jan 2007
    Posts
    229
    Good luck!

    What sort of drives control the servos?

    Are they tunable manually, (screwdriver on a pot) or is there a setting in your software somewhere to adjust the P,I & D settings- if so what are they at the moment?

Similar Threads

  1. VF-2 servo tuning
    By Rstewart in forum Haas Mills
    Replies: 1
    Last Post: 12-20-2018, 02:22 PM
  2. Servo tuning
    By bmlw in forum Daewoo/Doosan
    Replies: 2
    Last Post: 05-13-2010, 02:57 PM
  3. 6t Servo tuning?
    By Jerry Shorter in forum Fanuc
    Replies: 5
    Last Post: 08-17-2009, 11:28 PM
  4. SERVO TUNING
    By Capteod in forum Servo Motors / Drives
    Replies: 1
    Last Post: 09-17-2008, 04:46 AM
  5. appropriate servo tuning.... help?
    By howling60 in forum Servo Motors / Drives
    Replies: 6
    Last Post: 02-27-2006, 03:48 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •