First of all, this is an ancient Makino machine running on a Fanuc 10M controller. Approximately a year and a half ago, I was able to both successfully upload and download programs via ConnectCNC. However, we have a new laptop that we are trying to install the ConnectCNC on and no longer have the old laptop to look at the settings. We can transfer programs FROM the machine but have no luck with transfering TO the machine. There are no error codes or anything ---- the LCD just sits there waiting for info to be transmitted. I have the sneaking suspicion that there is a setting that I don't have set correctly but I don't understand how I can download yet not upload. Any help is GREATLY appreciated.
Thanks!
Thread: Can Download but Not Upload??
Results 1 to 2 of 2
-
07-01-2010, 03:50 PM #1
Registered
- Join Date
- Oct 2008
- Posts
- 7
Can Download but Not Upload??
-
07-01-2010, 04:00 PM #2
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24221
If you PM me an email ad I can send the RS232 manual for the 10
Al.CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Reply With Quote
Similar Threads
-
PMC Ladder Upload/Download - Fanuc Powermate D
By RLMTS in forum FanucReplies: 12Last Post: 05-09-2023, 09:01 AM -
AB 1398 GML Ultra Trouble upload/download
By hrhoward in forum Servo Motors / DrivesReplies: 0Last Post: 08-20-2008, 04:18 PM -
DMG MF Twin65. How to upload/download files?
By teal854t in forum Deckel, Maho, Aciera, Abene MillsReplies: 2Last Post: 07-04-2008, 10:24 AM -
Mazak M32 Comms Upload-Download
By Mr_Carpyman in forum Mazak, Mitsubishi, MazatrolReplies: 1Last Post: 07-25-2006, 07:50 PM -
Fanuc 18i Comms Download & Upload
By Mr_Carpyman in forum FanucReplies: 2Last Post: 06-26-2006, 07:14 PM
Posting Permissions
