[jeffm]

I have an OM control and I cant get the emergency stop to reset any ideas?

[Al_The_Man]

Depends on the MTB.
Over travel limits, Air pressure switch, door interlocks.
Schematics and ladder screen are a big help.
Al.

[timlkallam]

Twist the emergency stop knob so it will unlock.

[MysticMonkey]

Twist the emergency stop knob so it will unlock.

LOL. generally people that can't work that out can't download the internet either.

[von007]

I'm sure u tried the estop... So I would have to agree that your more than likely in a hard overtravel situation so use the emergency release and machine Rdy button together

[jeffm]

Twist the emergency stop knob so it will unlock.

I wish that was it. I didn't hit the button it went into emergency stop because it over traveled. It is sending the X axis the wrong direction when I home it

[Al_The_Man]

Have you checked the home limit is not stuck down/on?
If you now have it homing.
Al.

[jeffm]

You are The Man thanks that was it I didn't think about that but I did use the "machine is down" excuse to get in a round of golf and a days fishing

[fanucman]

I wish that was it. I didn't hit the button it went into emergency stop because it over traveled. It is sending the X axis the wrong direction when I home it

thats because you have a parameter set wrong for homing direction