584,860 active members*
5,162 visitors online*
Register for free
Login
Results 1 to 6 of 6
  1. #1
    Join Date
    Nov 2005
    Posts
    57

    Mazatrol m2 runs only 9999 blocks

    Can somebody answer if mazatrol cam m2
    in ISO mode is able to run more then 9999 blocks,
    and in case how?

    Thank you
    Sven.

  2. #2
    Join Date
    Mar 2003
    Posts
    2932
    I would assume it will only display N4 digits, but will run a program over 9999 blocks. Can you remove the N numbers from your program? In most cases they just use up memory.

  3. #3
    Join Date
    Nov 2005
    Posts
    57
    Its not that,it is the problem then you have more then four digits
    like N10001 it will stop and saying nummerical is out off range.
    Sven

  4. #4
    Join Date
    Nov 2004
    Posts
    260
    Quote Originally Posted by sve0019 View Post
    Its not that,it is the problem then you have more then four digits
    like N10001 it will stop and saying nummerical is out off range.
    Sven
    I belive this can be set at the Cam Post to use only 4 digit numbers, it will then just start the count over with N0001 and continue.
    Of cause you could just simply get rid of the numbers too.

  5. #5
    Join Date
    Mar 2003
    Posts
    2932
    Quote Originally Posted by sve0019 View Post
    Its not that,it is the problem then you have more then four digits
    like N10001 it will stop and saying nummerical is out off range.
    Sven
    As I said, why not remove the N numbers, or just number the tool changes or as Torsten suggests if your CAM system will do it, limit your N numbers to 4 digits.

  6. #6
    Join Date
    Nov 2005
    Posts
    57
    In the postprocessor I was setting sequence numbers to four,
    and N numbers to N like no.

    With thanks from Sven for helping out.
    End off problem.

Similar Threads

  1. Mazak M-4 Mazatrol T2 and mazatrol Cam T2 operating manual in english
    By tuanpq in forum Mazak, Mitsubishi, Mazatrol
    Replies: 31
    Last Post: 07-09-2021, 04:06 PM
  2. Sm1 well versed with mazatrol 640m or atleast ne mazatrol
    By naren1608 in forum Mazak, Mitsubishi, Mazatrol
    Replies: 0
    Last Post: 03-22-2010, 11:29 AM
  3. A way around the 9999 program line limitation?
    By Sierra Nevada in forum Fanuc
    Replies: 3
    Last Post: 01-05-2010, 08:43 AM
  4. KL5056 runs one way only
    By Filobus in forum Automation Technology Products
    Replies: 2
    Last Post: 09-11-2007, 02:52 AM
  5. X3 Mill just runs by it self
    By replicapro in forum Uncategorised MetalWorking Machines
    Replies: 12
    Last Post: 08-20-2004, 05:32 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •